Question about 1989 Cadillac Eldorado

Open Question

I need a schematic for a steering wheel column for a 1989 Cadillac Eldorado

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 95 Answers

SOURCE: need a diagram to put together a 1989 caddilac

Excellent tutorial here that helped me when I had a loose steering wheel on my 1988 Deville.

This one is not from an 89 Eldorado, but all GM Tilt/telescoping steering columns from that time are virtually identical:

http://www.diyfiero.com/dropspot/Jazzman_Steering_Rack_Rebuild.pdf

Posted on Oct 11, 2011

Ad
johnjohn2
  • 5763 Answers

SOURCE: 1989 cadillac eldorado 4.5l i need the diagram for the serpentine belt

okay, let me try to help you, its a 1989 eldorado 4.5 engine. here you are a diagram of the belt routing, hope this helps . good day.2_17_2012_8_59_07_pm.gif

Posted on Feb 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a broken horn "switch"?


there will only be one power wire ,that when you touch it to ground the horn will sound
that power wire goes up the column and is connected to a pin that runs on the bottom the steering wheel and makes contact to ground when you close the contacts in the center of the wheel padding

Oct 23, 2015 | 1993 Cadillac Eldorado

1 Answer

Bypass the security system in the ignition


if you are tlking about the RFI receiver for your ignition...it can not be done, you must have the chipped key to match the reciever in the steering column or it just will not start, period.

Jan 18, 2013 | 1989 Cadillac Eldorado

1 Answer

1989 cadillac eldorado 4.5l i need the diagram for the serpentine belt


okay, let me try to help you, its a 1989 eldorado 4.5 engine. here you are a diagram of the belt routing, hope this helps . good day.2_17_2012_8_59_07_pm.gif

Feb 17, 2012 | 1989 Cadillac Eldorado

1 Answer

Need a diagram to put together a 1989 caddilac eldorado power steering,tilt and telescope steering wheel and column.


Excellent tutorial here that helped me when I had a loose steering wheel on my 1988 Deville.

This one is not from an 89 Eldorado, but all GM Tilt/telescoping steering columns from that time are virtually identical:

http://www.diyfiero.com/dropspot/Jazzman_Steering_Rack_Rebuild.pdf

Oct 11, 2011 | 1989 Cadillac Eldorado

1 Answer

How to tighten 1989 steering column?


There is a u-joint inside the steering column if you have tilt wheel. Which I don't think that I have ever seen a steering column get loose if there is not tilt wheel. If there is not tilt wheel then there are two bolts that hold the steering column up against the bottom side of the dash. You will just need to tighten these two bolts. If you do have tilt wheel, then it is going to require taking the steering column out and replacing the u-joint in the steering column.

Dec 16, 2010 | 1989 Buick LeSabre

2 Answers

How to replace the turn signal switch in a 1992 Cadilac?


Turn Signal Switch REMOVAL & INSTALLATION CAUTION
Some models covered by this manual may be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column, and instrument panel disable the SRS. Deville, Eldorado, Seville, and Fleetwood - Early Models
  1. Disable the SIR system.
    1. On Deville and Fleetwood, remove the left lower sound insulator. On Eldorado and Seville, remove the left side sound insulator.
    2. Remove the Connector Position Assurance (CPA) and detach the yellow 2-way connector at the base of the steering column.
    3. Remove the steering wheel.
    4. Make sure the ignition switch is in the LOCK position to prevent the SIR coil assembly from going off-center.
  2. Remove the SIR coil assembly retaining ring and the coil assembly. Allow the coil to hang freely. WARNING
    The SIR coil assembly will become off-center if the steering column is separated from the steering gear and is allowed to rotate or if the centering spring is pushed down, letting the hub rotate while the coil is removed from the column.
  3. Remove the wave washer.
  4. Use tool J-23653-C or equivalents, to depress the shaft lock, then remove and discard the shaft lock retaining ring.
  5. Remove the shaft lock.
  6. Remove the turn signal canceling cam assembly.
  7. Remove the upper bearing spring, upper bearing inner race seat and inner race.
  8. Move the turn signal switch to the RIGHT TURN position.
  9. On Deville, Fleetwood, and 1990 Eldorado, and Seville, remove the multi-function turn signal lever as follows:
    1. Make sure the lever is in the OFF position.
    2. Remove the access cover from the steering column housing.
    3. Detach the cruise control wiring connector. Note the position of the connector when installed in the column.
    4. Pull the lever straight out of the turn signal switch.
  10. On Eldorado and Seville, remove the multi-function turn signal lever as follows:
    1. On 1992-93 vehicles, slide the connector cover toward the front of the vehicle.
    2. Unplug the electrical connector. On 1991 vehicles, note the position of the connector when installed in the column.
    3. Push the lever straight in, rotate clockwise 1?4 turn and pull the lever out of the switch.
  11. On Deville, Fleetwood, and Eldorado and Seville, remove the screw, button, spring, and hazard warning switch knob.
  12. On Deville and Fleetwood, remove the one signal switch arm retaining screw. On Eldorado and Seville, remove the 2 signal switch arm retaining screws. Remove the signal switch arm.
  13. Remove the turn signal switch retaining screws.
  14. Remove the wiring protector and detach the turn signal switch connector.
  15. Gently pull the wire harness through the column and remove the turn signal switch. prev.gif next.gif

Nov 12, 2010 | 1992 Cadillac DeVille

1 Answer

Need schematics for 1989 delta 88 royale steering column


steering columns are tricky bastards, even with schematic they are difficult ton rebuild, my advise is to carefully dissassemble and make notes, i have done many and you need patience, they only go back together one way and sometimes require installation of may parts at once and only in the proper order, have fun

Nov 16, 2009 | 1989 Oldsmobile Delta 88

1 Answer

Security ignition security wires break


Get a new ign. lock cylinder, put old chip key into it. Plug orange wire in from new cylinder at lower steering column . Hide or mount cylinder under dash. Start car with copy of old key, now no chip needed.

Mar 31, 2009 | 1989 Cadillac Eldorado

1 Answer

I can't find location of turn signal flasher


It should be under dash, left side of steering column. You might have to remove the knee booster and metal plate behind it to gain access. Hope it is the model, that it is attached to the steering column. Hope this helped.

Jan 22, 2009 | 1994 Cadillac Eldorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6910 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...