Question about Cars & Trucks

Open Question

P0137 code 2002 impala bank 1 sensor 2 - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
justuscc
  • 360 Answers

SOURCE: Please Help... p0404 and p0137 Error Codes (1999 Saturn SL1)

yes egr valve is a common thing on this saturn. very pricy and yes you need the rear o2 sensor good luck i have a used egr if interested off a sl2

Posted on Sep 29, 2008

Ad
  • 112 Answers

SOURCE: 2002 Pontac Grand Prix GTP P0171 code engine stumbling at times

Bank 1 is the frt side exhaust manifold (did they say bank 1 sensor 1?),you can start by replacing that sensor,i would check the intake for leaks ,the gm 6cly. are known for bad intake gaskets,you will see oil coming out form the frt or rear of the intake,also check your atifreeze overflow bottle for bronwish sludge,which means that the oil is mixing with the antifreeze.A leaking intake could cause that lean condition.

Posted on Mar 29, 2009

emissionwiz
  • 76682 Answers

SOURCE: Replacing bank 1 sensor 2 and bank 2 sensor 1 oxygen sensors

BANK ONE IS THE REAR BANK OF CYLINDERS AND TWO THE FRONT BANK

Posted on Jun 24, 2009

  • 3640 Answers

SOURCE: how to change a fuel bank sensor #1 code p1135 on

P1135 Air/Fuel Sensor Heater Circuit Response. (Bank 1 Sensor 1) ask any auto parts store what the fix is.

Posted on May 17, 2010

  • 17 Answers

SOURCE: 2002 chevy silverado hd2500 6.0 ecm code po332 low

If all connections are good "dry, tight, no corrosion" then yes. It should be a defective sensor. These sensors are piezo sensors and create a voltage when sensing a knock. A bank refers to a side on a V style engine, 2 refers to the rear sensor on your bank 2. Bank 1 should be the side with cylinder #1 which should be the cylinder closest to you on one of the sides. So your looking for the rear sensor on the opposite side.

Posted on Jun 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is bank 1 sensor 2 located at on 2003 dodge stratus wit a 2.4 engine ?


    Dodge Chrysler - YouTube

    ? 2:54
    https://www.youtube.com/watch?v=vs2DuvehVGA
    Oct 31, 2013 - Uploaded by 1A Auto Parts
    I want to know about a Dodge Stratus 2002 sensor. ... I have a 05 Chrysler 300 2.7 engine with a fault code ... images for Where is bank 1 sensor 2 located at on ...


    More images for Where is bank 1 sensor 2 located at on 2003 dodge stratus with a 2.4 engine

    Where is bank 1 sensor 2 located at on 2003 dodge stratus wit

    www.fixya.com/cars/t26025690-bank_1_sensor_2_located_2003_dodge
    22 mins ago - SOURCE: check engine light is on...bank 1 sensor1 oxygen sensor. if u have one .... 2.7L dodge stratus/ #1 bank #2 sensor location? on 2004 Stratus. Oct 24 ... How can I set the timing on a 1996 dodge stratus 2.4l engine.

    P0137 02 Sensor Circuit Low Voltage - OBD-Codes.com


Dec 28, 2015 | Dodge Cars & Trucks

3 Answers

Check engine code p0137


P0137 - Oxygen (o2) sensor circuit low voltage (Bank 1 sensor 2)
If you have more than one (1) sensor on Bank 1 then it will be the rear sensor. Change the o2 sensor. You may also want to check the following:
  • Repair exhaust leak near the rear sensor (if leak is found)
  • Check for restriction in catalyst and replace as necessary
  • Repair short, open, or high resistance on o2 signal circuit

  • Most likely you will just need to replace the sensor. Hope this helps you.

    Jul 05, 2013 | 2002 Honda Odyssey

    1 Answer

    How to fix 98 cadillac cater error codes


    Reset error codes by disconnecting battery for 5 minutes. Start fresh. all codes should be clear now. drive and see if any new codes come on. They are the ones you need to address.

    May 15, 2017 | 1998 Cadillac Catera

    1 Answer

    Codes P0131, P0137, P0341, and B1218. Code P0131 and P0137 were listed twice. This is for a 2000 chevy venture. I already spent $400. 2 years ago for emissions


    HI ghosthunter6 codes P0131&P0137&P0341 indicative of having electrical short .
    P0131 Front Heated Oxygen Sensor Bank 1 harness is open or shorted .
    P0137 Rear Heated Oxygen Sensor Bank 1 harness is open or shorted .
    P0341 Camshaft position sensor harness or connectors (The sensor circuit is open or shorted) .
    code B1218 horn relay coil circuit short to voltage battery .
    IT could be cousin problem with other sensors .
    First replace horn relay and clear E C M codes
    IF problem and codes P0131&P0137 come back you need o2 sensors .put I don't thank so.
    YOU MUST REPLACE HORN RELAY .OK

    good luck


    Jul 27, 2011 | Chevrolet Venture Cars & Trucks

    1 Answer

    Engine Code # P 0137


    P0137....O2 Sensor Circuit Low Voltage (Bank 1 Sensor 2)

    you have a faulty or bad connection on the sensor after the cat on bank 1 whichever side that is as i do not know and my alldata book only covers europeon models ,sorry

    Mar 05, 2011 | 2002 Dodge Intrepid

    1 Answer

    I have code p0137 coming up on my 2003 jeep grand cherokee laredo what does the code mean?


    P0137 - Oxygen O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2)

    Essentially the same as P0136, P0137 refers to the second oxygen sensor on Bank 1. P0137 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 2 is located to the rear of the catalytic converter and should produce an output signal relative to oxygen storage capacity of the catalytic converter. This rear (sensor 2) sensor is less active than the signal produced by the front sensor. However, if the ECM senses the sensor is inactive, this code will set.

    Symptoms: There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.

    Causes: A code P0137 may mean that one or more of the following has happened:
    * Faulty o2 sensor Exhaust leak near the rear sensor
    * Plugged catalyst
    * Short to voltage on O2 signal circuit
    * High resistance or open on O2 signal circuit

    Possible Solutions:
    * Replace faulty sensor
    * Repair exhaust leak near the rear sensor
    * Check for restriction in catalyst and replace as necessary
    * Repair short, open, or high resistance on o2 signal circuit

    Hpe hti shelps (remember comment and rated this).

    Jul 26, 2010 | 2003 Jeep Grand Cherokee

    1 Answer

    Po137/po157 codes no activity


    P0137 / P0157-Oxygen O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2) refers to the second oxygen sensor on Bank 1. P0137 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 2 is located to the rear of the catalytic converter and should produce an output signal relative to oxygen storage capacity of the catalytic converter. This rear (sensor 2) sensor is less active than the signal produced by the front sensor. However, if the ECM senses the sensor is inactive, this code will set.

    A code P0137 may mean that one or more of the following has happened:

    Faulty o2 sensor Exhaust leak near the rear sensor
    Plugged catalyst
    Short to voltage on O2 signal circuit
    High resistance or open on O2 signal circuit

    Possible Solutions…
    Replace faulty sensor
    Repair exhaust leak near the rear sensor
    Check for restriction in catalyst and replace as necessary
    Repair short, open, or high resistance on o2 signal circuit

    Mar 08, 2010 | 2000 Chevrolet Camaro

    1 Answer

    2000 saturn SL2,reader says PO131and (PO137 Peading)


    P0131 - oxygen sensor circuit low voltage (bank 1 sensor 1)
    http://www.obd-codes.com/p0131

    P0137 - oxygen sensor circuit low voltage (bank 1 sensor 2)
    http://www.obd-codes.com/p0137

    www.obd-codes.com

    These websites help me a lot. Hope they do the same for you too.









    Jun 07, 2009 | 1999 Honda Civic

    2 Answers

    Code P0157 and P0137


    Hi P0157 is
    02 sensor circuit low voltage bank 2 sensor 1

    P0137
    02 sensor circuit low voltage bank 1 sensor 2

    May 06, 2009 | 2000 GMC New Sierra 1500

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    107 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76673 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...