Question about 2002 GMC Envoy

Open Question

What size tie rod does a 2002 gmc envoy need 14mm or 16mm

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2002 GMC Envoy

If your 2002 gmc envoy or sierra will not even turn over with a kown good battery try starting it in nuetral then go back to park and try starting again. There is a park nuetral safety switch that can malfunction. Turn the key on then shift into nuetral, then turn fully to start.

Posted on Dec 17, 2008

  • 341 Answers

SOURCE: Replace the thermostat on 2002 GMC Envoy

4.2L Engine the thermostat and the neck where the hose goes on is one unit $25 at autozone

  1. Remove the necessary coolant from the radiator.
  2. Remove the alternator, Loosen the outlet hose clamp at the thermostat housing. Remove the outlet hose from the thermostat housing.
  3. Remove the thermostat housing bolts.
  4. Remove the thermostat housing from the engine block.
  5. Clean all of the surfaces of the thermostat housing.
  6. Clean the sealing surface of the engine block.

Posted on Dec 29, 2008

  • 1077 Answers

SOURCE: I need to know how

It would be to hard to tell and show you over the computer.
The best and easiest way for you is to buy a Chilton manual for your car at the autoparts store. The book runs about $20
This book is a do-it-yourself bible. It will show you everything you need to know on how to do maintenance and repair on your vehicle.

Posted on Apr 13, 2009

  • 35 Answers

SOURCE: need fuse box diagram 2002 gmc envoy

If I remember correctly if you look at the back side of the fuse cover, it should tell you what the fuses are. Also in the owners manual in the index, under fuses, it should give you a diagram of the fuse location for the acc. outlets. Good luck. The fuse should be a 20 or 25A fuse.

Posted on May 26, 2009

  • 410 Answers

SOURCE: I am changing the spark plugs on my 2002 GMC

.043. Good luck. Thanks for rating my response and for using FixYa!

Posted on Jun 28, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Spark plug gap 1994 GMC 5.7

Plug Specifications

Sep 30, 2014 | Cars & Trucks

1 Answer

Ball joint bolt fell out upper in 2007 GMC Envoy

Upper ball joint? That's not related to the job of replacing a tie rod or tie rod end. It's also not related to the brake job.

It's an '07 and it had a bolt-in ball joint? That's not factory - it's been replaced before.

Aug 07, 2014 | 2007 GMC Envoy

1 Answer

Are there 2 tie rod ends on front off 2002 envoy?

No, is the short of it, it must be broken, take it to a Front End specialist before something happens that hurt someone!!>>

Jun 06, 2014 | 2002 GMC Envoy

1 Answer

How do you tell what size thread is on a tie rod for a 2002 gmc envoy?

Measure the outer diameter of the outer tie rod
threads & the thread pitch of the threads

If it appears to be a metric size,the thread pitch will
confirm that & you convert the diameter to metric
by dividing by .0395

Sep 13, 2013 | Cars & Trucks

1 Answer

What size is the lower ball joint lug of a 2000 lincoln ls, 14mm or 16mm

16 mm. there is also a 1/2 year model with an 18mm look on the driver door where the latch is and see if your car was produced in may or june if so it is a half year model therefore it will be an 18 mm

Jan 02, 2013 | Cars & Trucks

1 Answer

2002 gmc envoy water pump

Hi, Will need specific info to help. Are you looking to replace the water pump and need instructions? If so, will need to know engine size in your Envoy. Thanks, Mike

Jun 13, 2011 | 2002 GMC Envoy

1 Answer

2002 gmc envoy xl front wheel bearing assy replace

take the wheel off,take the axle nut off,disconnect the spindle from the ball joint or joints, take the tie rod end out of the spindle and remove the spindle leaving the axle in the transmission. Now there is three bolts on the back of the spindle take theese out and beat the hub and bearing assy out. The new one wont be as hard to put in as the old one was to come out.

Dec 30, 2009 | 2002 GMC Envoy

1 Answer

I have a 2002 GMC envoy, when I come to a stop about 2 ft. from dead stop my front end thunks.

my envoy was doing this too, i went all through my brakes and it still did it, i noticed a bad tie rod end and after i changed it and had an alignment done i dont hear it anymore, so check tie rod ends for play and also check the sway bar end links

Nov 08, 2009 | 2002 GMC Envoy

1 Answer

Outer tie rod 1994 ford escort

You need  some sockets, and a good 1/2' ratchet. Sizes 13mm, 14mm ,15mm, 16mm,17mm and 19mm to undo the nut holding the swivel onto the hub carrier.  You will need a 17mm,18mm & 19mm open ended spanners to crack open the lock nut that secures the tie rod end onto the steering rack end. You may also need a pair of mole grips or small stilson type grips to undo the worn tie rod as it may be partially seized. A can of WD40. I have listed a few different sizes of spanners and sockets because in my experience if the tie rod has been replaced before certain parts manufacturers use different size nuts!
You should be able to remove this without jacking the car up but taking the weight of the wheel will help.

Apr 08, 2009 | Volkswagen Jetta Cars & Trucks

Not finding what you are looking for?
2002 GMC Envoy Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides