Wheres the thermostat on 2000 2.4 twin cam alero

Just below the engine compartment fuse junction box. Fluid must be hot when checked. DO NOT OVERFILL!

On this website you find fuse box diagram and description for Oldsmobile Alero (2000)

Oldsmobile Alero 2000 fuse box diagram Auto Genius

From my Mozilla Firefox browser, I typed in, "http://www.yahoo.com." When Yahoo pulls up, just type in, "photo/drawing of 1999 Oldsmobile Alero Knock Sensor location," and press the "Enter" key on your keyboard.

You will immediately get links to 16 photos/drawings of the Alero Knock Sensor location you seek. You will also find 10 more links using words, and an "Also try" list of 10-more similar words to use in your search on Yahoo to see what else might appear.

If you want to use your regular browser, here's the link you need to paste in so you can find those same photos/drawings: https://search.yahoo.com/yhs/search?p=photo%2Fdrawing+of+1999+Oldsmobile+Alero+Knock+Sensor+location&ei=UTF-8&hspart=mozilla&hsimp=yhs-002

Best wishes!

Michael

on the front of the engine

I'd check the ignition switch first

camshaft position sensor location on the V6 engine located at the front of the engine block below the power steering pump. the 4 cylinder engine camshaft position sensor location below ignition coil cover where coil cover say 2.4L TWIN camshaft sensor in that location below coil cover. you will see red or red white wires connected to it.

LOOK UNDER THE EXHAUST MANIFOLD HEAT SHIELD.THERMOSTAT HOUSING HAVE COOLANT INLET PIPE CONNECTED TO IT.PAY ATTENTION TO DIRECTION OF THEMOSTAT SO YOU CAN INSTALL IT BACK IN SAME DIRECTION.

It is located beneath the power steering pump in the engine block.

Hi,
2.2l ecotec = 5 quarts 2.4l twin cam = 4 quarts 3.4l = 4.5 quarts


Thanks
proton

Since some speeds are still working you probably need to replace your blower motor resistor. This is usually located on the engine compartment firewall or inside the ductwork near the blower motor. I'm not sure where on your vehicle.When you go to pick one up ask your parts man he may know the location.