Question about Mercedes-Benz Cars & Trucks

Open Question

Mercedes C180K wing mirror cover removal (reg,2007)

Wing mirror cover to be removed to access indicator strip.2007 model.Seems different to earlier 2000 models where release clip available from front of mirror wing assembly.

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: Indicator on wing mirror

Have you tried taking off the cover to see if the indicator cover is part of the entire wing mirror cover. I think it might all be part of the same cover. The Haynes manual may be able to help more.
Sian

Posted on Oct 19, 2008

  • 4 Answers

SOURCE: remove a wing mirror cover to fit indicator lens

If you have electric folding mirrors fold them in, if not fold the mirror back against the spring (not easy as it is quite strong). Looking from the front, to the mirror cover side of the spindle on which the mirror pivots if you pull it forward, you will see the end of the main mirror body which has a groove it it. At the end of the groove there is a springclip which can prised up using a flat bladed screwdriver. It is easiest to place the blade under the clip and twist the clip to release it. Once fully released the cover can then be withdrawn. Refitting is the reverse of the above but if the cover does not automatically clip in place you may have to force it back with the screwdriver.

Posted on Nov 10, 2009

  • 37 Answers

SOURCE: How do i remove indicator bulb on wing mirror Sprinter 2008

It's been a while, you go through the glass.. the big glass.. grab it lightly
slide it up adn then over left.. the bottom glass.. slide it left and the up and right at the same time.. its a little touchy so be patient.. now i cant remember but i think you have to removed the motor.. then you can access the bulb behind it.. best of luck!!

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change the indicator LED in the passenger wing mirror?


HOW DO I CHANGE THE RIGHT HAND MIRROR BULB ON 2007 57 PLATE C CLASS MERCEDES

Jan 15, 2010 | 2006 Mercedes-Benz C-Class

1 Answer

How do i remove indicator bulb on wing mirror Sprinter 2008


It's been a while, you go through the glass.. the big glass.. grab it lightly
slide it up adn then over left.. the bottom glass.. slide it left and the up and right at the same time.. its a little touchy so be patient.. now i cant remember but i think you have to removed the motor.. then you can access the bulb behind it.. best of luck!!

Jan 11, 2010 | 2008 Mercedes-Benz Mercedes Benz Ml Class

1 Answer

How to dismantle vw touran wing mirror


3598458-2hnw5qnnlcuxxqdipdrh2pk0-1-0.png FIRST U MUST REMOVE THE MIRROR.BE CAREFULL THEY TEND TO CRACK.THEN UNBOLT THE 2 TORX N8 .NO 8 AT THE ILLUSTRATION.REMOVE THE COVER GENTLY UPWARDS.UNCLIP THE INDICATOR PLUG WITH THE COVER OUT U MUST SEE ONE MORE TORX NO8 UNBOLT AND REPLACE THE INDICATOR.REPEAT THE PROCEDURE BACKWARDS TO ASSEMBLE THE MIRROR.CLICK IF U FIND THIS HELPULL.LET ME KNOW IF U NEED MORE INFO...GOOD LUCK!!

Dec 08, 2009 | 2009 Volkswagen Tiguan

1 Answer

How do i fit a replacement nearside wing mirror unit, to a mercedes c180 2007 saloon.And what type of tools do i need. Thank you. J.Woods


You'll need a screw driver (philips is most common), a plastic prying lever, socket (should be 10mm, but can't remember)

If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Oct 23, 2009 | 2007 Mercedes-Benz C-Class

2 Answers

Remove a wing mirror cover to fit indicator lens on the wing mirror for a mercedes c220 cdi 2003.


If you have electric folding mirrors fold them in, if not fold the mirror back against the spring (not easy as it is quite strong). Looking from the front, to the mirror cover side of the spindle on which the mirror pivots if you pull it forward, you will see the end of the main mirror body which has a groove it it. At the end of the groove there is a springclip which can prised up using a flat bladed screwdriver. It is easiest to place the blade under the clip and twist the clip to release it. Once fully released the cover can then be withdrawn. Refitting is the reverse of the above but if the cover does not automatically clip in place you may have to force it back with the screwdriver.

Oct 20, 2009 | 2003 Mercedes-Benz C-Class

1 Answer

VW indicator unit on wing mirror


Ok very carefully pull off the mirrior blade. The mirrior blade is clipped but EXTEMELY fragile and will break if forced. From there remove the 2 heated blade wires. The cover is also clipped as you will notice after that is removed. You have to pry with a plastic tip between the cover and hosing near the body of the car while pulling the clips in the housing you see to lift the cover straight up. Once this is done you'll need a t-10 torx screwdriver to remove the lower portion. These screws are when you're looking straight down. With this assembly off you can access the 2 other little screws holding the flasher to the bottom cover. Remove the wires and the little clip and there you go. Installation is reverse.

Nov 01, 2008 | 2005 Volkswagen Golf

1 Answer

Indicator on wing mirror


Have you tried taking off the cover to see if the indicator cover is part of the entire wing mirror cover. I think it might all be part of the same cover. The Haynes manual may be able to help more.
Sian

Sep 21, 2008 | 2004 Volkswagen Golf

1 Answer

How do you replace the wing mirror cover ?


hi there the easiest way is to remove the lower black cover 2xscrews then with aplastic spreader locate the 2 tabs that hold black cover to mirror cover and press them in and pull black cover down then with a small pry tool carefully prise mirror glass out and disconect wires this will reveal the small single screw that holds the cover to the mirror unit remove this and the rest should be self explaned hope this helps..

Aug 04, 2008 | 2007 Audi A4 Convertible

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...