Question about Cars & Trucks

Open Question

How to replace Toyota Tacoma blower motor resistor

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 373 Answers

SOURCE: Where is blower motor resistor

HI....
The BLOWER motor resistor on a Toyota Camry 01.
Is located Behind center right side of dash.
ON blower housing.
If you vehicle is equipaded with protection cover.
Just you need to remove the cover. and will see the blower resistor.

I hope this information work for you.

Thank you for use fixya.

Posted on Jul 21, 2008

Ad
  • 479 Answers

SOURCE: blower motor resistor replacement

the relays are behind the glove box. you have to take the glove box out to have access to the relay for the heating system 

Posted on Dec 10, 2008

michigan man
  • 3533 Answers

SOURCE: 03 Santa Fe blower motor resistor replacement

the part you need to replace is the blower motor resistor assembly it has a screw on each side of it with a plug in th middle and for the most part it is on the passanger under the dash behind a black cover stop by a auto store and take a look at one and then you know what you are looking for and at the same time you can find out how much its going to cost i am only going to guess it somewhere around $15.00 to 25.00 dollars.

Posted on Feb 14, 2009

  • 2 Answers

SOURCE: how to replace a blower motor resistor in a 2004 jeep liberty

You have to take the glove box off and it is right behind it, need a #20 Torx to take it replace it. The glove box is the hardest part of the job, I just replaced mine on an 05 Grand Cherokee but it didn't fix it for me, was well worth the $8.60 to try though.

Posted on Apr 06, 2009

  • 82 Answers

SOURCE: AC blower motor resistor Nissan Maxima 2000

yeh its located under the passenger side glove box,its in the heater box beside the heater motor ,,2 scews hold it in and it looks like a credit card when its out,,,,

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Toyota Tacoma fan blower dont work before that


It sounds like the blower motor resistor is bad. Replace it.

Sep 26, 2014 | 1997 Toyota Tacoma

1 Answer

How do I axcess the fan motor in the 2007 tacoma


The air conditioning fan motor is located under the glove box. Three bolts, forget the size, but about an 5 or 6mm (7/32 i rumored to work well). Pull the plug out after you drop the motor.

Picture of 2 of the three screws here.

http://www.toyotanation.com/forum/61-2nd-generation-2005/246763-hvac-blower-motor-resistor-replacement.html

The connector is shown here

http://www.toyotanation.com/forum/61-2nd-generation-2005/361736-ac-heater-blower-motor-failure.html

Jul 14, 2014 | 2007 Toyota Tacoma

1 Answer

Blower resistor Toyota Tacoma 2007 where is locater . How i can replace.


Might be the Resistor pack located close to the blower. Could be under the dash or under the hood, but always close to the blower itself. Usually has a flat connector with 4 or 5 wires, and two small screws holding in the duct. It may be a crispy critter. It happens... The blower moves air across it to keep it cool. The blower motor may be bad as well, or possibly the fan speed switch. May very well be the fuse for the blower as well. The blower connector may be loose. Let me know what you find.

Dec 02, 2012 | 2007 Toyota Tacoma Double

1 Answer

2006 Toyota Tacoma AC Blower works intermittently


there is a TSB for a noisy blower motor and not working except on Hi, both cover under 36K miles, repair includes replacing blower motor and or resistor block and harness, judging your problem can be a bad resistor block and harness. hope it helps

Jul 30, 2012 | 2006 Toyota Tacoma

1 Answer

2006 Tacoma fan blower only works in high.


the blower resistor is bad. find the blower motor and follow the wires to the resistor, its bolted to the air box.

Nov 24, 2010 | 2006 Toyota Tacoma

1 Answer

Low and medium heater blower inoperative on 2006 toyota tacoma.


Resistor blown in heater. Follow the wires from the heater motor ( in foot well ) to a plug in the ducting between the fan and main heater body in centre of car. Unplug and remove the plate , it should be held in by a couple of screws. The plate should have a couple of wire coils of which , a couple will be broken. Replace resistor and heater should work.
Happy heating Marshall

May 05, 2010 | 2006 Toyota Tacoma

1 Answer

Blower motor resistor


Two bolts a little neck twisting 5 mins...
Look under the dash follow the wiring from the blower any two of them will lead you to the resistor. It's in the air box about.

Jul 27, 2009 | 2006 Toyota Tacoma

2 Answers

Toyota tacoma heater fan runs slowly in the 3rd & 4th positions


Using a voltmeter, the resisted voltage values for the fan motor are as follows:
LOW- 3 VDC
Med LOW - 6 VDC
Med HIGH - 9 VDC
High - 12 VDC

The fan resistor gets 12 volts from each position of the fan switch, and the 12 VDC is then lowered thru each of the 3 internal resistors inside the fan resistor. My guess is that the resistor has failed, and the resistance wires contained on it may have meshed together. The resistor is on the black box between the blower motor housing and the center of the dash. 2 phillips screws hold it in. Easy to remove/replace. Hope this helps, and thanks for choosing FixYa.

Nov 23, 2008 | 1983 Toyota Camry

1 Answer

Blower reisitor, 1998 Toyota Tacoma


The blower motor resistor is located in the heater box area, which is under the dashboard on the passenger side. You will find the resistor in the large squarish tube that leads to the center of the dash from the blower motor housing (right to left on an american vehicle). Unplug the large black wiring connector, remove the 2 phillips screws and the resistor is ready to pull out of the heater box.

Sep 19, 2008 | 1998 Toyota Tacoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...