Question about 2005 Dodge Neon SXT

1 Answer

I changed the fuse and it keeps blowing out then I got it to work but an hour later it stopped now the horn does not work either

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 76,848 Answers

The horn is the same fuse. You need to have the power point plug that blows the fuse replaced it is shorted inside, a common problem. Remove the dash panel from the car and the receptacle is held into the dash with a large sheet metal nut, unscrew that and unplug the wiring to it making a note of which wires go where on the plug.

Posted on Nov 08, 2012

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 840 Answers

SOURCE: WIPER AND HORN FUSE KEEPS BLOWING

check ground wires/ one may be loose there are a few on the engine compartment/ please rate my reesponse thank you very much

Posted on Jan 31, 2009

  • 114 Answers

SOURCE: constant horn blowing

Very possibly the horn relay. This is located in the left junction block ( fuse panel) on the left side of dash. Open driver door and you will see a panel cover on the end of dash. On the cover it should list the position of the relay which I believe is on the right of fuse panel. If you try the horn and it sticks on again, try tapping the relay, if stops then that is the problem.

Posted on Mar 23, 2009

jturcotte
  • 8578 Answers

SOURCE: when running air condition, if

try unplugging the horns to see if they are the problem. If the fuse still blows, the problem is the wires from the relay to the horns. If the fuse doesn't blow, plug in one horn at a time to see which one is bad.

Posted on Jul 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horn blows on it's own in 1999 WH Statesman, can it be fixed or do i need a new steering wheel


Carbon infused pads or contacts in the steering wheel horn pad can become changed by age and heat.

Nov 03, 2017 | Cars & Trucks

1 Answer

Body control module on 2005 f350 6.0l diesel. Horn keeps blowing


This is no BCM problem this is an steering wheel airbag problem the cover is warped and this causes the horn to honk like you are pressing it.

Oct 30, 2016 | Ford F-350 Cars & Trucks

2 Answers

Why does my stop/horn fuse keep on blowing out?


you have a short circuit along the wiring... good luck trying to trace where that wire with worn out sheathing ~ usually at pinch points

Mar 21, 2015 | 1992 Honda Accord

1 Answer

I have a 1990 chevy cheyenne c2500. my brake lights,parking lights and blinkers arent working and when i try to replace the fuse,it blows immediatly. what could the problem be?


What is the amp rating on the fuse that keeps blowing? I looked at wiring for stop lamps, 15 amp fuse. Unplug connector for stop lamp switch, see if the fuse still blows? Also see if anything at connector looks burned or melted.

You could have problem with fuse box, itself. Look at back side of fuse box, see if anything looks burned or melted.

Feb 28, 2015 | 1990 Chevrolet C2500

1 Answer

Horn blow out


The horn should be behind the grille or on one of the fenders in the engine compartment. If you unplug it and the fuse does not blow I would say the horn is done.

Sep 08, 2012 | 1997 Jeep Wrangler

1 Answer

1995 riviera buick horn want stop blowing and some times blow fuses


Faulty horn relay.sounds like relay is sticking or horn botton is stuck.

Jun 06, 2012 | Buick Riviera Cars & Trucks

1 Answer

Horn on 2002 Gmc Sierra 1500 stopped working. Horn stated boleing fuses a couple of years ago and was just changing fuses to fix problem short term. Last time horn stopped working I changed fuse and it did...


Sounds like the horn itself is shorted out. You didn't mention if the blown fuses were a result of using the horn. A horn in construction is an electromagnet acting on a diaphram; if the electromagnet develops a short, it causes an overcurrent condition and will blow the fuse.

Jun 23, 2011 | 2002 GMC Sierra 1500

2 Answers

99 dodge durango. My horn keeps blowing the 20 amp fuse under hood. There is also a horn relay. Could that be the problem? The horn will work after I replace the 20 amp, but blows within a few times of...


could be you might check it out. many items take the same relay so you might try exchanging it with another one with the same numbers. If that isn't it you may have a short in the horn itself.

Aug 11, 2010 | 1999 Dodge Durango

2 Answers

The fuse for the horn keeps blowing. Any reason


Most common problem is the ground that the horn connects to wit the bolt is rusted and causes it to pull to much amperage so clean the contact first then if it still blows the fuse then the horn relay or the horn may be going bad.over time the horn gets junk in it and causes the coil to overheat and causes it to burn out. Horns cost $15.00 for a new horn and are easy to change. I doubt the relay is bad but it is always possible.

Feb 05, 2010 | 2003 Chevrolet Suburban 1500

3 Answers

My daughters 1998 honda accord ex keeps blowing fuses she is having to replace the brake light fuse after we replaced the brake light switch when she changed the fuse last the horn blew and she was shocked...


The horn and rear brake lights are on the same fuse. Eventually the horns rust out like on my 1998 CRV. Once I replaced the horns, I could put in a new fuse without it blowing every time I sounded the horn. Problems still remain, namely: the cruise control does not engage and the remote start only starts the engine that runs for two seconds then dies. Still looking for an answer. It's a "Code Alarm" with Codestart dated 11/24/99.

Jan 05, 2010 | 1998 Honda Accord

Not finding what you are looking for?
2005 Dodge Neon SXT Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...