Question about 1999 Chevrolet Silverado 1500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: purge solenoid location
which vehicle are you actually looking for the purge solenoid on? you have 2 vehicles listed in your question. i'll answer both, lol
the locations are described as if you are looking at the engine from the front of the car with hood open.
on the blazer:
it is located on the left side of the intake manifold just under and behind the throttlebody. it is a canister looking device.
on the silverado:
it is located on the intake manifold on the left side in about the same spot as the blazer. providing the silverado has the 5.3 or 5.7 liter engine. if it also has the 4.3 then obviously it will be the same.
hope this helps!
Posted on Feb 17, 2009
The purge sol. is mounted on top of the intake manifold. it has one hose and one connector plugged in to it. here is a picture
Posted on Jun 08, 2011
Tips for a great answer:
Mar 23, 2017 | 2005 Chevrolet Avalanche
Dec 19, 2015 | 2000 Chevrolet Chevrolet Cavalier Base
Evaporative Emission (EVAP) System Large Leak Detected
A fuel fill cap that is left OFF after a fuel fill will cause this DTC to set.A loose, missing, or damaged fuel fill cap can cause this DTC to set.A blockage or restriction in the EVAP purge solenoid, purge pipe EVAP canister, or vapor pipe, can cause this DTC to set.A temporary blockage in the EVAP purge solenoid, purge pipe, or EVAP canister could cause an intermittent condition. Inspect and repair any restriction in the EVAP system.To help locate intermittent leaks, use the J 41413-200 to introduce smoke into the EVAP system. Move all EVAP components while observing smoke with the J 41413-SPT .To improve the visibility of the smoke exiting the EVAP system, observe the suspected leak area from different angles with the J 41413-SPT .Observe the Freeze Frame/Failure Records vehicle mileage since the diagnostic test last failed may help determine how often the condition occurs that caused the DTC to set . This may assist in diagnosing the condition.
Jan 30, 2013 | 1999 Chevrolet Silverado 1500
Dec 06, 2012 | 1999 Chevrolet Malibu
Jun 08, 2011 | 2005 Chevrolet Silverado 1500 2WD
May 10, 2010 | 1999 Chevrolet Silverado 1500
Sep 01, 2009 | 1999 Chevrolet Silverado 1500
Jul 06, 2009 | 1999 Chevrolet Silverado 1500
May 09, 2009 | 1999 Chevrolet Silverado 1500
Feb 16, 2009 | 1999 Chevrolet Silverado 1500
68 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: