Question about 2007 GMC Yukon

Open Question

2007 GMC yukon DIC is not on

Driver Information Center Display not working

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 2007 gmc yukon denali wont unlock w/ keyfob

Check the buttons.. I have an 06 Grand Prix with the Remote starter on the top and it seems that the conductor on the buttons worn out.. Take the keyfob apart, pull the rubber buttons off the chip, lick your finger and touch the place where the unlock (right side of the fob) would be. That should unlock your doors. I just did it with mine. I would just buy another fob on ebay and change the buttons out.. Hope this works

Posted on May 24, 2010

Ad
  • 7353 Answers

SOURCE: Replace headlamps 2007 GMC Yukon

It should be pretty easy, thats why there no "directions" Lift up the hood, now at the headlights there should be 2 rods, lift these rods and the lights should lift out, to access the bulbs.

Posted on Nov 06, 2009

bschilz
  • 2049 Answers

SOURCE: 2007 GMC YUKON denali, rear brakes have an air

Here's a link to a thorough article on the subject which should help you...

http://www.aa1car.com/library/abs_bleeding.htm

Posted on Oct 13, 2009

  • 1 Answer

SOURCE: DIC not working

2004 GMC Sierra DIC stuck in language select mode. Cannot select any other mode.

Posted on Sep 29, 2009

  • 1311 Answers

SOURCE: Intermittant dead battery problem since

A technician will need to a parasitic drain test on the electrical system to determine where the battery drain is taking place. Sometimes the glovebox or vanity mirror lamps don't shut off and drain the battery.

Posted on Sep 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the engine control module have any thing to do with the information center not working in my 2007 Suzuki xl7


My Cluster DIC is dead. is true name.
driver info center display.
no, and yes
post 2 by U
its just a data display
all brain boxes in the car talk to it on
an network
why not elaborate what the DIC display does
its totally dead
fuses.

why not add to one post and not do 3 ,on 1 topic.?

Feb 20, 2017 | 2007 Suzuki XL-7

1 Answer

I have a Suzuki 2007 xl7 and the information center is not working, could it be the body control module causing this


post 3 and still not one photo or word,as to what information is missing?
and then 3 ,posts
My Cluster DIC is dead. is true name.
driver info center display.
does not working mean DEAD
as this display shows 100s of data.
the operators guide on this,seems endless......
so DEAD is clear.more clear
is it dead,with head lamps on>?


why not check fuses first
then scan it,2nd.
say this
why x,y.z are dead
"speedo, fuel, radio, nav, data, or waring lamps dead or, or or
we cant guess what you can not see!
see?

im reading the book on your are saying
the DIC is dead.?
driver information center=DIC
it clearly states "instrument cluster"
if that is totally dead (vast data there possible)
it can be.
1; fuse blown to it.
2:it;s bad
3: communication to it lost, network issues.

it is a pure,data display
as all such devices need this. to function.
1; power
2:good data.
not scanning it now, is hopeless.
OBD2 scan tool , any. use it ,scan it and win.

does this display glow if head lamps are turned on.?
.e2894d14-d90a-45a4-8a89-d6006d01783b.jpg

Feb 20, 2017 | 2007 Suzuki XL-7

1 Answer

My a/c quit blowing cold and i got a code saying engine hot a/c turned off


What code ? Was it a code or a message on the DIC - driver information center .

Sep 13, 2016 | 2009 GMC Yukon Denali

1 Answer

How can I change language in DIC (to English)?


The radio displays driver information center (DIC) information when it first powers up. The uplevel radio shows the time and outside temperature on the first line of the display, and DIC information on the second line of the display.
There are 3 DIC buttons on the radio.
?€¢
ENTER


?€¢
INFO


?€¢
MENU

Mar 15, 2016 | 2005 Chevrolet Malibu

1 Answer

The DIC in my yukon 2007 ask me to check the left front tire pressure, and the DIC shows the pressure is 52, but the actual pressure is proper, whats the problem and how i can fix it.


sounds like you will need a new sensor that sits inside the tire at the valve stem.. some are costly some are not.. will require a tire machine to replace..

Jul 02, 2012 | 2007 GMC Yukon

2 Answers

My Driver Information Center (DIC) stopped working in my 2005 Pontiac Grand Prix. The fuse seems to be OK since the other lights are working in the instrument panel. The DIC isn't showing anything. Any...


REMOVE THE DIC CENTER SEE IF IT IS GETTING POWER.SHAKE WIRES SEE IF DIC CONTROL WILL LIGHT UP WITH IGNITION ON ENGINE OFF.IF POWER GOING TO DIC CENTER AND SHAKE WIRES YOU STILL DONT SEE THE OIL DISPLAY LIGHT UP.DIC CONTROL COULD BE FAULTY.

Sep 04, 2011 | 2005 Pontiac Grand Prix

1 Answer

My park assit is on and the sensor are not working for backing up can they have dirt in them


{: ) The PARK ASSIST OFF message will be displayed when the parking assist system is disabled due to conditions that disable or inhibit the system. The object alarm module requests the DIC display PARK ASSIST OFF when it detects one of the following conditions:
• The parking assist system is manually disabled using the driver information center (DIC). • An object is attached to the rear of the vehicle, such as a trailer, bicycle rack, trailer hitch receiver, or tow bar. • The object alarm sensors are covered by snow, mud, dirt, slush, or ice. • The vehicle bumper is damaged. • Excessive paint thickness on a replacement object alarm sensor. • The object alarm sensors are disrupted by vibrations, like those caused by a large nearby vehicle or from heavy equipment such as a jackhammer.

The SERVICE PARK ASSIST message will be displayed when the object alarm module detects a malfunction in the parking assist system and the system is disabled. It could be one of your sensors is at fault or even the module.

May 18, 2011 | 2007 GMC Yukon Denali

3 Answers

The park assist service light comes on when i start the vehicle. i do not have an owners manual to reference.


{: ) The driver information center (DIC) displays SERVICE PARK ASSIST when the object alarm module detects a malfunction in the parking assist system and the system is disabled. The DIC also displays SERVICE PARK ASSIST when a loss of communication occurs with the object alarm module. Usually this is caused by faulty components or wirings. Better visit your dealer if still under warranty, for one park assist sensor only costs too much. If your bumper had been knocked off or had previous repairs outside the dealership, that's another thing.
The PARK ASSIST OFF message is displayed in the DIC when the parking assist system is disabled due to conditions that disable or inhibit the system. The object alarm module requests the DIC display PARK ASSIST OFF when it detects one of the following conditions:
• The parking assist system is manually disabled using the driver information center (DIC). • An object is attached to the rear of the vehicle, such as a trailer, bicycle rack, trailer hitch receiver, or tow bar. • The object alarm sensors are covered by snow, mud, dirt, slush, or ice. • The vehicle bumper is damaged, • Excessive paint thickness on a replacement object alarm sensor. • The object alarm sensors are disrupted by vibrations, like those caused by a large nearby vehicle or from heavy equipment such as a jackhammer.

Apr 14, 2011 | 2009 GMC Yukon

1 Answer

Park assist warning came on.


{: ) SERVICE PARK ASSIST The driver information center (DIC) displays SERVICE PARK ASSIST when the park assist module detects a malfunction in the object detection system and sends a request to the DIC for display of the message. The DIC also displays SERVICE PARK ASSIST when there is a loss of communication with the park assist module.
PARK ASSIST OFF The PARK ASSIST OFF message is displayed in the DIC when the park assist system is disabled due to conditions that disable or inhibit the system. The red LED in the rear display, as well as, the telltale in the switch will be lit, notifying the driver the PARK ASSIST system is disabled. The object alarm module requests the DIC via the serial data circuit to display PARK ASSIST OFF when it detects that one of the following conditions is true:
• The object alarm system is disabled through DIC vehicle customization feature. Refer to the Owners Manual for more information. • An object is attached to the rear of the vehicle, such as a trailer, bicycle rack, or hitch receiver. • An object is hanging out of the endgate. • The park brake is not fully released. • The system receives vibrations from a large nearby vehicle or from a heavy equipment such as a jackhammer. In the case of objects attached to the rear of the vehicle such as a trailer, hitch receiver, or a bicycle rack, or objects hanging out of the endgate, the rear parking assist (RPA) will have an Automatic Object induced disable feature where the RPA will determine if the rear object is moving with the vehicle. If the RPA detects such a condition, the park assist will be disabled. The PARK ASSIST OFF message will continue to be displayed until the trailer hitch receiver is removed and the vehicle is driven forward above 24 km/h (15 mph).

Feb 07, 2011 | 2007 GMC Yukon Denali

1 Answer

The driver information center buttons on the steering wheel are not all working. only 4 out of the 8 work. checked the ipc/dic fuse which is not blown. how to fix?


there is a good possability that either the button contacts are bad,the very thin wires are broken or the contact area of the horn ring that the circuit using is bad.You will need to have it diag.at a shop rather than just trying parts to fix it.

Feb 26, 2010 | 2006 GMC Yukon Xl Denali

Not finding what you are looking for?
2007 GMC Yukon Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...