Question about 2003 Buick Century

1 Answer

Cant get wires off the plugs - 2003 Buick Century

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 180 Answers

What we do with front wheel drive vehicles is take the top engine motor mounts off.Then you will need some help to rock the car forward on park,you will see engine move toward radiator,then block the wheels.Be carefull when you put arms behind engine, if you can put a wood block between angine and firewall to keep engine from moving.This should give you enough room.

Posted on Nov 08, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What opel spark plugs can i fit on my daewoo lanos 1.6sx


are you saying that daewoo spares do not sell plug wires for daewoo cars ---
go to a daewoo wreckers -junkyard--and get plug wires from them

Aug 17, 2016 | Daewoo Cars & Trucks

1 Answer

My power window plug at the door and body has a wire that is broke off in the plug itself. It has a clip that I cant seem to be able to remove. Suggestions??


Hi,are you saying that you cant remove the block connector,if its that you have removed the block connector but cant get the wire out of the connector,I would sudjest you just cut the old block off and replace it with a new one.all the best.
ps,let me know if this is what you ment.
ps,maybe if there is anough wire on bougth sides you could just cut and join them together with a connector.

Apr 19, 2015 | 2004 Dodge Durango

1 Answer

How to remove wires from sparkplugs of a guick lucerne


USE A SPARK PLUG WIRES BOOT PULLER.THE BOOT PULLER CAN GO TIGHT PLACES WHERE YOUR HANDS CANT REACH.ONCE YOU REMOVE SPARK PLUGS WIRES REPLACE THEM.SOME PLUG WIRES WILL BREAK AWAY FROM THE BOOT WHEN REMOVING SPARK PLUGS WIRES.DONT REMOVE OLD PLUG WIRES IF YOU DONT HAVE NEW SET PLUG WIRES ON HAND.BECAUSE YOU WILL DISABLE VECHICLE.IF COUPLE OLD PLUGS WIRES BREAK WHILE REMOVING THEM YOU WILL BE 2 PLUG WIRES SHORT AND YOU CANT DRIVE VECHICLE THAT WHY HAVE NEW SET OF PLUG WIRES ON HAND.

May 12, 2011 | Buick Lucerne Cars & Trucks

1 Answer

Cant find the wire to unplug and dissable est on 1991 s-10 to set timing


I believe it should be a 4 wire plug. There should be 4 wires coming out of the distributor with a plug. I know some GMs had a single green wire with a plug also.

Jun 14, 2010 | Cars & Trucks

1 Answer

1990 ES 250: i cant take off the top of the engine so i can cha...


You should just need a extention to get at the plugs and a plug wire puller and you should be good no need to disacemble

May 18, 2010 | 1990 Lexus ES 250

1 Answer

I replaced the spark plugs and now it won't start


Did you gap the plugs and replace the spark plug wires exactly the way you removed them? Did you remove any wires from the distributor cap? Make sure Each spark plug wire snaps on, it cant simply float on top of the plug, the wire must be firmly seated on the plug tip.

Mar 09, 2010 | 1995 Ford Aerostar

1 Answer

I cant determine which plug on the wiring harness


The Correct Plug Has a PINK Wire With a Black STRIPE on it

Sep 27, 2009 | 1994 Cadillac Fleetwood

1 Answer

Cant find the towbar electrics plugs for x-type


I assume that the towbar didn't come with a proper wiring kit as, unfortunately there is not a specific connector for the towbar wiring on the x-type, the proper Vehicle Specific Kit plugs into the rear light. There is a power connector with three pins on the left and a grey reverse sensor cut out connector also on the left. but you will either need to use a Vehicle Specific Wiring kit (about £175) or use a bypass relay system.

Aug 30, 2009 | 2006 Jaguar X-Type

1 Answer

I cant see the wires goint to the spark plugs,


they come off the distributor cap to the plugs

Aug 21, 2009 | 2008 Mitsubishi Lancer

Not finding what you are looking for?
2003 Buick Century Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...