Question about 2001 Nissan Maxima
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First check your brake fluid. It may be low. If its low, have your brakes checked, they may be worn out and you may need brakes. If the master cylinder is tottaly empty, than you may have a leak. Here is a quick test for the E-brake switch. Look at the "brake light" while its on and pul on the e-brake while you are holding the release button in the handle. Pump the e-brake lever repeadetly and observe the "brake light" if it gets brighter and dimmes as you are pumping the e-brake lever., than the swithc is OK and you have a low brake fluid level. Hope this helps. let me know what you find.
Posted on Dec 12, 2008
bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .
Posted on Jan 04, 2009
Primary ignition fault. Reasons: Bad distributor cap (most likely) or ignition control module/ignition coil.
Hope that helps
Posted on Mar 18, 2009
your brake light switch has malfunctioned. it is locatad on top of the brake pedal but you have to stand on your head to see it up there it is a very easy fix one nut and one wire clip. when you replace it have some one watch the back of the car while you push the brakes. you will have to adjust the switch so that when you tap the brake pedal a little ways the brake lights come on. and if you do not feel comfertable to do this you can take it to a repair shop of your choice. i hope this helps you. and please rate my solution
Posted on Apr 21, 2009
SOURCE: ABS light stays on
that has four wheel anti lock so your gonna need to either take all them off and clean ends it may correct the problem but more than likely your gonna have to take to a large shop that has abs computer to find which sensor is bad then correct the problem
Posted on May 24, 2009
Tips for a great answer:
Apr 30, 2014 | 1996 Nissan Maxima
Sep 27, 2012 | 2001 Nissan Maxima
Sep 01, 2012 | 2001 Nissan Maxima
Aug 30, 2012 | 2002 Nissan Maxima
May 21, 2011 | 2000 Nissan Maxima
Dec 01, 2010 | 2004 Nissan Maxima
Jun 04, 2010 | 1998 Nissan Maxima
Mar 05, 2010 | 2001 Nissan Maxima
May 23, 2009 | 2001 Nissan Maxima
230 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: