Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the wheel, remove the hub nut, remove the brake caliper and rotor, put your socket and extension through the hub flange onto the bearing retainer bolts, undo them, release the abs sensor connector if it has it, remove the bearing and hub flange as an assembly, put the new one on and go backwards from here. Torque the hub nut to 180 ft/lbs, your done.
Posted on Apr 08, 2009
Yes, it can be removed and run without the thermostat. However, your gas mileage will suffer and the heater may not work very well.
Posted on Apr 29, 2009
If all the bolts are off, then the gasket is holding the oil pan in place and your going to have to tap it with a mallet, Not a hammer but a mallet so you don not damage the oil pan. Good luck and hope this helps.
Posted on Jul 13, 2009
SOURCE: Need instructions on how to
First ascertain from the auto parts dealership with vehicles brands about the availablitity of parking lights bulbs. Once acquired, the installation process takes over as explained. Second, decide on contacting a electrician at the mechanics else the processes performing the task elsewhere requires the appropiate tools, time, and an extra pair of hands. Third, depending on the type of vehicle, the parking lighting bulbs would be accessible by reaching into the engine if the replaceable ones are at the front, or accessing the truck area from the interior of the vehicle if the rear bulbs require repairs. However also,the type of vehicle may least require loosing of screws or bolts and nuts. A more complicated vehicle may require tools capable of reaching into the engine, and sometimes require applying pressure to extract the blown fuse bulbs. Contact an electrical expert at the mechanic.
Posted on Jan 18, 2011
There should be 4 access screws holding it down locate them in the console and it should come right out good luck hope this helps
Posted on Jul 17, 2011
Tips for a great answer:
Aug 26, 2016 | 2012 Dodge Grand Caravan
Jan 16, 2016 | 2006 Pontiac Montana SV6
Dec 26, 2015 | Cars & Trucks
Sep 22, 2015 | 2001 Pontiac Montana
Feb 24, 2014 | 2006 Pontiac Montana SV6
Mar 25, 2013 | 2000 Pontiac Montana
Jan 09, 2013 | 2002 Pontiac Montana
Jul 17, 2011 | 2006 Pontiac Montana SV6
Apr 29, 2009 | 1999 Pontiac Montana
Dec 12, 2008 | 2003 Pontiac Montana
Oct 17, 2017 | Jeep Cars & Trucks
49 people viewed this question
Usually answered in minutes!