Question about Cars & Trucks
Can anyone advise how to replace the heater blower motor in a 1993 honda accord ex.I have the glove box out and the retainer strap undone and the bolts(3) removed from the housing.Do I need to remove the ac housing as well to clear the glove box edge or ???????
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It's simple!...Open glove box door...youll see a plastic shell that is the glove box rear portion. You should find 4, 9/32nds or 7mm (same thing just SAE or Metric) screw heads. Undo four screws and with a flat blade screw driver, gently pry out on shell at either side to clear the door straps. Once clear, just work out of resting place, set aside. You will now see like 5 relays mounted on top of the air handler. Remove bracket that holds four of them + one that is mounted alone. Pull out of the way. Checking both inside and outside, remove all screws, bolts, nuts as it were, until it is obvious there are none left. Now, this is assuming this is where your problem lies! If you are simply having a blower problem, it might be the blower module mounted right beneath and just behind relays on top of air handling box. Just take your time so you dont break anything. Good luck...theroad......
Posted on Jun 08, 2009
See Figures 2, 3 and 4
Posted on Dec 28, 2009
the blower motor is located behind and under the glove box. its held to the blower housing by three screws. remove the three screws and the motor will slide down and towards you. to test the motor. apply power to the yelllow/black wire and ground to the blue/red wire. the motor should run. if not you prob have a faulty power resistor.
Posted on Mar 17, 2010
It is behind and underneath the glove box back by the firewall. No need to pull out the glovebox.You may need to pull the carpet back to get to one of the bolts.
Posted on May 18, 2010
Tips for a great answer:
Nov 16, 2014 | 2001 Honda Accord
Jan 19, 2013 | 1991 Honda Accord
Jan 24, 2011 | Honda Accord Cars & Trucks
Mar 06, 2010 | 1991 Honda Accord
Feb 26, 2010 | 1993 Honda Accord
Oct 22, 2009 | 1996 Honda Passport
Oct 22, 2009 | 1993 Honda Accord
Oct 08, 2009 | 1993 Honda Accord
Jan 16, 2009 | 1994 Honda Accord
55 people viewed this question
Usually answered in minutes!