Question about 2003 Volvo S60
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
inside the door there is a cable that goes in the window motor. there is supposed to be a clip attached to the cable which stops the motor when the clips gets to the motor. it may have come off
Posted on Jun 18, 2009
The oil cooler tank on the side of the radiator has cracked and allowed oil into the cooling system. Replace the radiator and you will need to flush the cooling system A LOT. and be careful driving it for a while, the mixture can take a long time to clear out of the head which can cause it to overheat.
Posted on Jul 30, 2009
SOURCE: CODE 042 ON A VOLVO S60
Brake lights and cruise control are not set properly.
Easy check - are your brake lights coming on with just the usual light touch of the pedal? If not, then the microswitch that senses that your foot is on the brake needs to be adjusted or replaced.
Posted on Sep 22, 2009
Close all doors.Turn ignition key to position 1.PRESS AND HOLD trip reset button,immediately turn ignition to position2,keep trip button held untill trip is reset to 0.A yellow warning light will show when it is time to release trip button.Release within 4seconds ,a bleep will be confirm reset.Before you start reset, do not reset trip,If trip has been reset to 0,turn ignition to position 2 hold reset for 10- 15 secs untill previous reading is shown,then start reset.
Posted on Nov 02, 2009
Tips for a great answer:
Oct 09, 2015 | 2004 Volvo S60
Mar 15, 2014 | 2004 Volvo S60
Oct 02, 2010 | 2004 Volvo S60
Jan 17, 2010 | 2002 Volvo S60
Oct 03, 2009 | 2004 Volvo S60
Jan 17, 2009 | 2004 Volvo S60
Dec 29, 2008 | 2004 Volvo S60
188 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: