Question about Mazda Premacy
Car not getting enough revs to start engine and run car - diesel model
Have the battery tested and then if it passes have a starter draw test run as well. Also make sure the battery cables are in good condition and clean and free of corrosion and tight to the posts.
Posted on Nov 07, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you can find a manual at Napa or Oreillys auto parts store for around 20 dollars hope this helps please rate this solution thanks
Posted on Aug 29, 2008
SOURCE: Urgent: Run out of diesel
This link might provide you with some of the images for the engine component locations. You would be interested with the fuel lines going into the Common Rail Injection System as they would be providing the inflow of diesel fuel to the high pressure pump for the injectors. Additionally, you might find this page an interesting read with illustrations.
My apologies that I can not email you directly due to certain restrictions.
Good luck again.
Posted on Jul 09, 2008
I have a Mazda B2200 from 1985, which has the same R2 diesel motor, and I had this same problem, which was exacerbated by the cold of winter....even here in a mild Melbourne.
Each time you turn the ignition on, the QSS (Quick Start System) powers up the glow plugs for about three seconds. This recycles again about three times, then.....nothing. The QSS reckons that you ought to have the bugger running by now!
In my desperation, I located the cable to the four glow plugs, and ran a second wire from the battery (+) via a push-button switch which I installed on the dash. This is my glow-plug BOOST circuit.
Now, when I want to start from c-c-c-cold, I push the button (with the ignition on) for about ten or fifteen seconds, which gives the glow plugs a goodly time to heat up the combustion chamber, and when I hit the starter, she usually fires up with a rattle, and a cloud of grey exhaust smoke.
(Of course, once the motor has warmed up, there is no need to use this BOOST circuit, for the combustion chambers are already hot enough to detonate the injected fuel.)
Have a go at it, as I know that it works!
Posted on May 28, 2009
TD4 engine suffers from faulty injectors, this is a common cause of poor starting on this model. The best was to diagnose this is to carry out an injector leak off test.
Posted on Nov 28, 2009
Tips for a great answer:
Oct 13, 2017 | Mazda Cars & Trucks
Nov 20, 2015 | Mazda Cars & Trucks
Jan 24, 2015 | Mazda Cars & Trucks
Apr 17, 2014 | Mazda MPV Cars & Trucks
Nov 16, 2012 | Mazda MPV Cars & Trucks
Nov 07, 2012 | Cars & Trucks
Jul 04, 2011 | 2002 Mazda MPV
Jul 22, 2010 | 2004 Mazda MPV
Feb 25, 2010 | 2002 Mazda B-Series
Nov 22, 2017 | Mazda Cars & Trucks
136 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: