Question about Cars & Trucks

1 Answer

Door handle needs replacing - Cars & Trucks

Posted by on

  • 3 more comments 
  • dudi Nov 07, 2012

    What kind of car?

  • Michael Patton Nov 07, 2012

    Make & Model ?

  • mark pittam Nov 08, 2012

    saab 900s

  • ZJ Limited
    ZJ Limited Nov 08, 2012

    This procedure explain how to replace this handle without any cutting and not destroying anything. It is a pretty simple procedure: 1. Pry off the interior door pull handle cover with a screwdriver (its fastened like a clamshell). 2. This should expose two torx-head screws at each connection point. Unscrew them. 3. Pry off the door mirror control cover panel. 4. Pry the plastic cover from the inner door handle lever, then undo the torx-head screw and unclip the handle from the operating rod. 5. Remove all visible remaining perimeter door panel screws including the single push plug above the door latch to loosen the door panel from door. 6. Lift the door panel up over the door lock plunger and pull away from door. 7. The upper connection point of the interior handle is held on with a push-on star circular retainer on the inside of the door panel. Pry this off from the inside of the door panel. Reverse procedure to install.

  • ZJ Limited
    ZJ Limited Nov 08, 2012

    Also, could check replacement parts here:http://www.thesaabsite.com/93old/Saab-93...

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 17,970 Answers

Please, send us detalils about year, make and model car there.

Posted on Nov 07, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Remove interior door panel 2002 Chevy tracker


No you don't need any special tool . Find all screws on out side of door trim panel and the window handle , the mirror cover plate , then just pull on edge of the panel .
Gently pry the front side door trim panel (3) from the front side door by disengaging the plastic retainers which secure the panel.
Position the door trim panel (3) away from the door in order to gain access to the front side window switch electrical connector, if equipped.
Disconnect the window switch electrical connector, if equipped.
Remove the door trim panel (3) from the vehicle.
Remove the front side window switch from the door trim panel (3) by releasing the 4 plastic retaining tabs, as needed.

Use a cloth in order to pull off the snap ring which secures the front side door window regulator handle (1), if equipped.
Remove the window regulator handle (1), if equipped.
Remove the front side master window switch, if equipped. Refer to Power Accessory Switch Panel Replacement .

Remove the front side door inside handle (1). Refer to Front Side Door Inside Handle Replacement .
Remove the outside rearview mirror opening cover (2).
Remove the screw which secures the front side door pull handle (4).

Front Side Door Inside Handle Replacement
Removal Procedure
Remove the screw which secures the front side door inside handle (1).
Slide the inside handle (1) forward in order to release the retaining tabs which secure the handle to the door.
Open the front side door inside handle rod retainer and remove the front side door inside handle rod from the inside handle (1).
Remove the inside handle (1) from the vehicle.

Check out youtube video showing how to do it !
How To Remove Install Front Door Panel Suzuki XL 7

Jun 10, 2017 | Cars & Trucks

1 Answer

How do i remove the right front out side door handle on a 1993 dodge dokota pick up truck?


If you cant open the door at all you are screwed! To replace the outside handle you need to remove the door panel to access the bolts that attach the handle to the door.

Apr 15, 2017 | Dodge Cars & Trucks

1 Answer

How do I replace inside door handle passenger side on a 2011 GMC Terrain?


Search Results

    How To Install Replace Inside Door Handle Chevy Equinox ...

    ? 9:02
    https://www.youtube.com/watch?v=cY6asyM2R6g
    Feb 2, 2012 - Uploaded by 1A Auto Parts
    How To Install Replace Inside Door Handle Chevy Equinox 05-09 1AAuto.com .... found your tutorial on fixing my driver's side door handle for my 2006 Equinox. .... Door Handles Chevy Equinox 2010 2011 2012 GMC Terrain ...

    How To Install Replace Inside Door Handle 2007-13 ...

    ? 9:05
    https://www.youtube.com/watch?v=QonKLwhk2CE
    Apr 2, 2015 - Uploaded by 1A Auto Parts
    http://www.1aauto.com/interior-door-handle-driver-side-front/i/1adhi00417 1A Auto shows you how to repair, install, fix,change or replace a broken or snappe... ... 10, 11, 12, 13 Chevy Silverado, Tahoe, Suburban and GMC Sierra, Yukon Denali ...2007-2011 Tahoe Yukon Suburban Escalade Vent Section ...Missing: terrain

    How To Install Remove Rear Outside Door Handle 2007-13 ...

    ? 10:02
    https://www.youtube.com/watch?v=7ZUTqqEzpZg



Feb 08, 2016 | GMC Cars & Trucks

1 Answer

Need a guide on how to handle of the door


  1. How it's done:
    1. Remove the door panel to gain access.
    2. Remove and replace the broken door handle.
    3. Inspect door latch and replace if not working.
    4. Check door for proper operation.
    5. Reinstall door panel.

Door Handle or Door Latch Replacement Service Cost YourMechanic

Mar 20, 2015 | Cars & Trucks

1 Answer

I need to replace my holden barina right outer door handle since it is broken


remove the door trim and inside at the handle you will see 2-3 nuts that hold the handle in the outer skin of the door.

Mar 25, 2014 | 1993 Suzuki Swift

1 Answer

Outer door handle replacement


hi, you have to take the door panel off the inside of the door and then their will be two bolts holding the handle from inside the door their will also be metal pins tha run through the handle these need to be put back on properly else the door wont open

Apr 10, 2010 | 1996 Eagle Talon

1 Answer

I have a susuki forenza and I need to replace the driver's side door handle. I already have the new part (door handle).


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the inner door handle and replace with new one. If it's your outer door handle, pull back the weather seal and disconnect the linkage to the outer door handle and then remove the bolts securing the outer handle to the door

Oct 23, 2009 | 2006 Suzuki Forenza

2 Answers

Replace exterior door handle on a jeep commander


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and disconnect the linkage to the outer door handle and then remove the bolts securing the outer handle to the door

Oct 23, 2009 | 2006 Jeep Commander

1 Answer

Replace inside door handle


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can replace your door handle and reconnect it to the linkage and then reinstall the panel

Oct 20, 2009 | 1997 Toyota Camry

1 Answer

How to replace drivers door handle


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can replace your inner door handle. If it's your outer door handle, pull back the weather seal and remove the bolts and disconnect the linkage from that handle

Sep 25, 2009 | 1995 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...