Question about 2007 Pontiac Grand Prix GXP Sedan
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First check for power at the light sockets and make sure they are properly grounded. The neutral start switch should also be the backup light switch (located on the transmission at the shift lever). If vehicle is starting in the correct shift positions, likely it is adjusted properly. However, have someone watch the backup lights and move shift lever through the gears. if while moving lever lights flash, switch may be slightly out of adjustment. Pink or dark blue wire should be power supply to switch, light green should send power to lights.This is powered by a 15a fuse on the fuse panel.
Posted on Apr 06, 2009
Posted on Oct 17, 2009
This would be the third time I've run across this one. I believe one of your low beam filaments burnt out but you didn't notice it much since you still had one working. When the last one went out this gave the appearance that both suddenly died. Unplug each headlight bulb and check with an ohmmeter for "opens" (high resistance). I'd bet you need to replace both the bulbs.
Posted on Feb 27, 2012
Tips for a great answer:
Dec 22, 2016 | 2007 Pontiac Grand Prix
May 28, 2014 | 2006 Pontiac Grand Prix
Feb 27, 2014 | 1999 Pontiac Grand Prix
Aug 21, 2012 | Pontiac Grand Prix Cars & Trucks
May 04, 2011 | 2005 Pontiac Grand Prix
Dec 31, 2010 | 2006 Chevrolet Cobalt
Dec 15, 2010 | 1999 Pontiac Grand Prix
Oct 17, 2009 | 2006 Chevrolet Trailblazer
Apr 06, 2009 | 1998 Pontiac Grand Prix
Sep 04, 2014 | 2007 Pontiac Grand Prix GXP Sedan
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: