Question about Oldsmobile Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: crank position sensor location
you will need to remove the starter to gain acess to the ckp sensor. once you remove the starter look on the engine block and you will see the sensor. The only problem with doing this repair yourself is that you will not be able to preform the crankshaft position variation learn procedure with out a factory scan tool. The vehicle may crank an run, but the timing advance curves will be wrong so the vehicle will probably cut off every time you remove your foot from the gas pedal. Hope this info helps!
Posted on Aug 18, 2008
I fixed mine at a junk yard. It's a simple wire C clip in the front of the handle and the whole thing slips right off. They sold me another handle off a pontiac. They pulled the old one and installed the new one for $25.00 total.
Posted on Oct 16, 2008
SOURCE: I am seeking location of
Disconnect Car Battery
I replaced the ignition switch in my wifes 2000 intrigue. (ignition mounted in front dash). I had to take off the knee bump trim and the trim around the instrument housing and remove the instrument cluster. Leave it connected and just lay it on the dash. You also need to remove the radio to get to one of the screws that hold the ignition switch module. Once you get that loose you can pull it out so you can disconnect the wires going to it.
If you need to replace the ignition module insert the key and turn to accessories, there is a small metal button to push in, then your key and the lock part will fall out to install into your knew ignition module. At that time you can also remove the cruise control cable.
I am not a mechanic and the whole process only took me an hour or so.
I replaced my ignition module to fix the heater and AC operation. It also fixed the cruise control that hadn't worked for a year.
Posted on Jan 30, 2009
your cabin air filter is located under the windshield wiper cover on the passenger side of car open your hood to see the access panel
Posted on May 29, 2009
Tips for a great answer:
Jun 10, 2015 | 2000 Oldsmobile Intrigue
Nov 14, 2013 | 2000 Oldsmobile Intrigue
Sep 19, 2010 | 2000 Oldsmobile Intrigue
Apr 06, 2010 | 2000 Oldsmobile Intrigue
Oct 10, 2009 | 2000 Oldsmobile Intrigue
May 29, 2009 | 2000 Oldsmobile Intrigue
Aug 13, 2017 | Oldsmobile Cars & Trucks
44 people viewed this question
Usually answered in minutes!