Question about Cars & Trucks

1 Answer

Can't locate headlight adjuster screw 2010 siera 1500

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 76,673 Answers

Pop the hood and look straight down on the top of the light, behind the light there should be a screw hole (one round and one oblong) to the left and the right. You'll need a torx driver (I believe a T15) to adjust these. The round hole is for vertical adjustment and the oblong is for horizontal

Posted on Nov 07, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 840 Answers

SOURCE: Headlight Adjustment

this should be on the opposite side of light

Posted on Jan 25, 2009

TwinTurboZ
  • 78 Answers

SOURCE: Headlight Aiming/Adjustment

On the sides of the Radiator cross member. Look straight down. Should be a silver colored phillips head screw

Posted on May 15, 2009

taran_2005
  • 10515 Answers

SOURCE: How do you adjust headlights

Hi,

Second generation cars would be from 2004 - 2010.

Loom at :-

http://www.ncttora.com/fsm/05+/data/ileaf/06toyrm/06toypdf/06rmsrc/rm2006ta/051000.pdf

You need to have acrobat reader to read it. The above manual is similar to 2010.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Sep 12, 2010

  • 4793 Answers

SOURCE: 2001 VW Jetta Headlight adjustment. Headlights

sometimes the headlights stick to the adjusters,just pull/push(wiggle it)to free it, then try setting beams.

Posted on Apr 14, 2010

  • 1986 Answers

SOURCE: Adjust Headlights Horizontally in Hyundai Sonata 2002

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights not bright


It's very difficult to see how a keyless remote could cause the problem you describe, to be honest.

The problem may lie in the reflective shield inside the headlight though you would notice any defects.

I'd still check the earth wires for the headlights though.

Jan 27, 2016 | 2010 Dodge Ram Pickup 1500

1 Answer

How to Adjust Headlight 2010 kia optima


There should be a little knob or screw on the back of the headlight housing. You turn it left or right and the light will move up and down.

Feb 13, 2015 | 2010 Kia Optima EX

1 Answer

I have a 2010 GMC Siera Hybrid that is having issues with the stability trap warning light coming on and beeping. It also causes the power to drop off to idle. I tried to seek out other help, and fo


You DO NOT replace any parts based on any OBD Code

Codes are used to diagnose vehicle systems with a fault

You have to component test to find problems

No testing,no failed parts, no parts are needed

Have to find a problem

That takes professional tools & lots of OBD 2 Knowledge

Nov 08, 2014 | 2010 GMC Sierra 1500 Hybrid

1 Answer

How I adjust headlights on a 1999 grand am?


  • Determine the type of headlights you have on your car. You can only adjust composite headlights if they bolt to adjuster plates. For dual headlights, look on the headlights for four adjustment screws per side. Sealed beam units have interior adjustment screws under the hood.
  • 4 Locate your adjustment screws. On sealed beam units, you may need to remove the trim screws and pull the trim off to reveal the Torx screws.
  • 5 Begin with you headlights turned on to the low beam. Use a Torx screwdriver for sealed beam units and Phillips screwdrivers for other types of headlights.



  • Dec 09, 2010 | 1999 Pontiac Grand Am GT

    2 Answers

    How do I adjust the headlights on my 2010 dodge ram 2500?


    On the fender there is a hole with an arrow embossed in the metal.Use a t-20 torx driver and adjust as needed.

    Nov 15, 2010 | 2010 Dodge Ram Pickup 1500

    2 Answers

    How do you adjust headlights??


    The best way to do it is to park your car in front on a garage door, a building or put a piece of plywood in front. Whichever you use, park you car at least 10 feet away; so you can tell if you are going up, down or in the middle when adjusting.
    1. Remove the four screws that secure the headlight trim bezel to the grille.
    2. Remove the headlight trim bezel.
    3. Turn the headlight high beams on.
    4. Adjust the headlights. Use the adjustment screws located along the outboard side and the inboard lower corner of the headlight bucket. Adjust the headlights until the beams are centered directly on the wall.
    5. Replace the headlight trim bezel.

    Nov 15, 2010 | 1995 Ford Escort

    2 Answers

    Headlight adjustment screws


    They will probably be inset adjacent to the headlight. You'll find a horizontal and a vertical adjusting screw, with small springs behind them. Some cars come equipped with a small level (like a carpenter's level) attached to the top of the headlight under the hood to help you get the correct adjustment.

    Nov 12, 2009 | 1992 Dodge Dakota

    2 Answers

    1998 Ford Mustang Headlight Adjustment


    The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

    You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

    Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

    For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

    For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

    Mar 16, 2009 | 1998 Ford Mustang

    3 Answers

    96 Dodge Ram 1500 wiring diagram for headlights.


    Here's a link to a pdf file containing the headlight wiring diagram for your year model Dodge Ram 1500..
    I can't help but notice that you say you've replaced the headlight relay? That's quite odd, because there is NO headlight relay on this vehicle- only a 40 amp fuse located in the power distribution box that sits behind the battery inside the engine bay.
    The switch is notorious for burning out because there is NO RELAY on this vehicle, and there is a recall (#819) but this only affects 3500 models even though the headlight wiring is the same for 1500,2500 and 3500 model Rams.
    Here are two more links that will help you troubleshoot your headlights problems.
    HereInformation on Putting a Relay in the Wiring System

    Mar 07, 2009 | 1996 Dodge Ram 1500 Club Cab

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    180 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76673 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...