Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Chevy Impala Door lock issue
Which is it, 98 Eclipse, or 06 Impala? Either way, your door lock actuator is stuck in the locked position either electrically or mechaically. The way to check this is to remove the door panel and unplug the actuator. If door lock can now be moved then you have an electrical problem (faulty door lock switch or faulty door lock module). If you still cannot unlock door then actuator is mechanically bad and must be replace (usually the case)
Posted on May 30, 2009
Passenger side of the fender under the hood - check the fuse relay box - about $12.00 a piece - they do go bad from time to time.
exchange the power lock relay with another one and test the locks.
then put the relay back and go to the autostore.
Posted on Aug 12, 2009
the shift lever solenoid is going bad, you didnt mention if it was a column shifter lever or console shifter so i cant tell you how to bypass it, same problem with my chevy,hope this helps, you may need to get this done by a dealer or honest mechanic, if you can find 1, but im sure it will help you out if you look like you know what your talking about, im sure this is your problem! good luck
Posted on Jan 07, 2011
SOURCE: The left rear door lock
Hello: The lock/unlock unit is part of the mechanical door lock assembly. The first thing to do is remove the door panel. Check and make sure the linkages are all connected, then make sure the wires are properly connected to the door lock assembly. If all the previous is ok then you will need to replace the lock/unlock assembly. to do this you need to remove the mechanical lock assembly first then remove the actuator. It might be best to have a professional accomplish this task. You also should disconnect the actuator an check to make sure you have 12v going to the actuator when you activate the door lock switch.
Posted on Jan 14, 2011
SOURCE: back driver door won't lock
Hello, this is caused by a bad door lock actuator. the door lock actuator is part of the door latch. the door latch will need to be replaced to correct this problem.
Posted on May 30, 2011
Tips for a great answer:
Jul 25, 2015 | 2008 Chevrolet Impala LT
Mar 12, 2013 | Cars & Trucks
Sep 24, 2012 | 2008 Chevrolet Impala LT
Sep 24, 2012 | 2008 Chevrolet Impala
Sep 17, 2012 | 2008 Chevrolet Impala
Sep 09, 2011 | 2008 Chevrolet Impala
Jul 31, 2011 | 2008 Chevrolet Impala
Jun 05, 2011 | 2008 Chevrolet Impala
May 29, 2011 | 2008 Chevrolet Impala
109 people viewed this question
Usually answered in minutes!