Question about 1993 Toyota Corolla
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
OK. On the front edge of the seat bottom cushion, pull up hard, both sides. This will dislodge the 2 clamps that holds the seat cushion to the floor. Pull the seat cushion out & set it aside. You will now see the female latches bolted to the area where the rear of the seat cushion meets the rear seat back bottom. Remove the bolts (14 mm I think).
Posted on Oct 07, 2008
to check the fuel pump on you car you need to put ignition in the on position and open the butterfly of the MAF sensor that is mounted on top of your air filter. Toyota's fuel filter won't come on unless there is air going in the engine. your problem may not be the pump, so you need to check the pump properly.
Posted on Apr 30, 2009
The fuel pump is located in the fuel tank and it can be reached by removing the back seat of the car.
be sure to get a fuel pump of the same rating with the one you are replacing.
Posted on Nov 09, 2009
If you put your foot on the brake, the tail lights and parking lights will still come on. Possibly your brake is sticking. Check to see if it is and if it is put WD40 for a quick fix. See a tech for them to fix your brake alignment. Good Luck!
Posted on Jul 14, 2010
Tips for a great answer:
Apr 07, 2015 | Toyota Cars & Trucks
Dec 01, 2012 | Cars & Trucks
Aug 26, 2010 | 1993 Toyota Corolla
Jul 29, 2010 | 1993 Toyota Corolla
Jun 16, 2010 | 1993 Toyota Corolla
Mar 23, 2010 | 1993 Toyota Corolla
Mar 11, 2010 | 1993 Toyota Corolla
Aug 18, 2009 | 1993 Toyota Corolla
Jul 26, 2009 | 1999 Toyota Corolla
Apr 28, 2009 | 1993 Toyota Corolla
67 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: