Question about Cars & Trucks

Open Question

Changing the front light bulbs on the honda foresight

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: change dashboard light bulb in 2002 Honda Accord EX V6

you will need fill up screw driver and a flat head remove the 2 screws that hole the BLK panel . then you use your flat head gently push up and out on the lower left and right coroners . be very carefull make sure you got time no rush. NOTE : make sure you go pick up the LIGHTS I USED sylvania lights part #74 LL YOU WILL NEED 14 OF THEM COST 4.99 FOR A SET OF 2 AND IF YOU HAVE AUTOMATIC CAR YOU WILL NEED CALL A HONDA DEALERSHIP AND FIND OUT IF THEY HAVE THE ONES THAT LIGHT UP WHEN YOU CHANGE GEARS.

  • after you got the BLK panel off you will see 2 gold screw do not take them off.
  • remove 4 BLK screw , two of them will be next to the gold screw . the other will be right on the top
  • after you got the screws off
  • stat pulling out the dashboard out slowly ..
  • after you see that the dashboard dosen't want to come out you should be able to see these 3 green wire connection one on the left , right and one in the middle
  • I use a long flat screw driver to push the small clip in the middle then at the same time push up.
  • one you took off all 3 you can pull it out .(CAREFULLY)
  • TWIST OFF THE SMALL BLK ONES OFF VERY EASY YOU CAN BUY AT ANY AUTO STORE . BUT FOR THE ONE THAT LIGHT UP WHEN YOU CHANGE GEARS IF YOU AUTOMATIC YOU WILL HAVE TO GET THEM FORM THE HONDA DEALERSHIP FOR THE WHT ONES I STILL don't know how to take them off . am going to see if honda can give me a hand .
  • just to let you now am also changing the clock light and the Cruise control/TCS button light also
  • O I for got change all the lights in the dashboard cause it is a b***h to take it off.
  • hopefully this helps

Posted on Jan 06, 2011

Ad
emissionwiz
  • 76649 Answers

SOURCE: cant bleed front brake on honda foresight 2001

Try opening the bleeder and just let it gravity bleed is what I would try.

Posted on Jun 16, 2012

dttech
  • 4803 Answers

SOURCE: bleed front brake on Honda foresight

You will probably get a better answer if you post your question under the correct category. Honda Foresight belongs in the "Motorcycles" category, not the "Cars & Trucks" category. (Car & Truck experts are not likely to have a good solution for your scooter)

Posted on Jun 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant bleed front brake on honda foresight 2001


Try opening the bleeder and just let it gravity bleed is what I would try.

Jun 16, 2012 | Cars & Trucks

1 Answer

Bleed front brake on Honda foresight


You will probably get a better answer if you post your question under the correct category. Honda Foresight belongs in the "Motorcycles" category, not the "Cars & Trucks" category. (Car & Truck experts are not likely to have a good solution for your scooter)

Jun 16, 2012 | Cars & Trucks

1 Answer

1995 Honda Accord Brake lights not working. Center bulb was burned out. Changed the bulb, now the brake lamp light is on the dashboard and the brakes aren't lighting up


Did u change the bulb w/ the Honda's original BULB? They have a different type BULB in honda, the amperage and the base contact is different from a regular bulb. Hope that helps u out! taah!

Nov 16, 2010 | 1995 Honda Accord

1 Answer

How do you change a front signal bulb on a 2004 accord


Front turn signal bulb replacement

1. Remove the inner fender
2. Disconnect the 3p connector from the front turn signal/side marker light.
3. Turn the bub socket ( 45 degree ), counterclockwise to remove the bulb.
4. Install a new bulb in the reverse order of removal.

Apr 12, 2010 | 2004 Honda Accord

1 Answer

Need to change the front right blinker signal bulb


look under the hood right behind the light bezel. you'll see where it plugs into the bezel. twist the light counter-clockwise.

Mar 29, 2010 | 1998 Honda Civic

1 Answer

Where is the fuse for the right side tail light?


hi if it is only the one bulb not working/tail light and the front light on same side is working along with number plate and other tail lights may i suggest you replace/check the bulb on defective light as if fuse had blown ? the front light on same side would not be working if you put ignition on and press brake your brake light shoul work ? if so change the bulb as the bulb has two elements inside tail light and a higher wattage element for brake light

Feb 25, 2010 | 2004 Honda Accord

1 Answer

How to change fog lights bulbs on my 2005 honda


548ae69.gif
  1. Remove the fog light mounting screw.
  2. Disconnect the connector from the fog light.
  3. Turn the socket about 45° counterclockwise and remove it from the housing.
  4. Remove the bulb from the socket.
To Install:
  1. Install the bulb in the socket without touching the glass with bare hands.
  2. Turn the socket about 45° clockwise to install it.
  3. Connect the connector to the fog light.
  4. Install the fog light mounting screw.

Jul 14, 2009 | 2005 Honda Odyssey

1 Answer

Replacing FPS running light


If I remember Correctly you have to take out the whole headlight Assembly to change that1 little bulb

Dec 30, 2008 | 1991 Honda Accord

1 Answer

Change bulb on 3rd brake light on 2005 honda accord


Check for screws from the inside of the trunk,  If none then unit should slide towards front of vehicle, many melt into place due to high bulb temp in small plastic housing

Dec 09, 2008 | 2005 Honda Accord

1 Answer

Change front turn signal


You have to remove the signal unit from the bumper using a normal " + " screwdriver then twist the bulb holder at the back of the sinal unit.

Nov 23, 2008 | 1991 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...