Question about 1996 Jeep Grand Cherokee

1 Answer

Jeep GC axle oil change

How do I change the front and reatr axle oil on a 1996 Jeep Grand Cherokee Laredo?

What type of oil/grease do I use?

Posted by on

  • Anonymous Mar 18, 2014

    Im prettynsure thenfront axle doesnt have power goin TN to it is there a vaccum hose that engages the front while in 4x4?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 404 Answers

Undo the lower plug on your diff housing,drain tighten plug up, undo top plug fill til overflow,same as front,oil refer to owners manual or call local service centre

Posted on Jan 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is a diagram for grease /lube under chassis locations


under-body only.check
my guess not gear lube. right>? axles/gear boxes, (a plenty)
2wd, or 4wd?
what do you want to grease, you never said.
bearings, tie-rods, ujoints etc. only>?

are you asking for ZERKS? only?
or all places on car with grease.?
or
are you saying just grease? and only things that must not be removed for service with grease, (like wheel bearings and splines)

The free book posted over 200 times.
chapter 0, read that? lube/maintenance?
see the 4wd exceptions?
my 2010 has none.

http://www.morris4x4center.com/knowledge-base/index.htm?utm_source=cj#service

the map includes LUBE points.
but adds gear boxes,axle gears, GL4 and GL5 (gear lube) is lube. too
but engine oil is not lube, to 1996 books.

1993.(oldest for GC) the word LUBE is wide reaching...
26132343-42iidcav35y5jytkvom0adnh-2-0.jpg
i love the NUT typo.
26132343-42iidcav35y5jytkvom0adnh-2-1.jpg
my guess is you meant grease only
and with no disassemlbly

Mar 16, 2016 | 1996 Jeep Grand Cherokee

1 Answer

Gear box oil for 2006 grand cherokee laredo v8 47l


which box,
A/T box
M/T box
transfer case box
RTM?
06 gc. gen3 WK car.
the fsm full is here free.
http://colorado4wheel.com/manuals/Jeep/WK/WK%20FSM/

read that, its all there, DL it while still free.

Mar 02, 2015 | 2006 Jeep Grand Cherokee Laredo

1 Answer

1996 jeep Gc laredo 4.0 should the dist rotor point to #1 cyl at tdc


at tdc your rotor has to be pointed at five o' clock for the engine to start. first position the oil pump slot at 5 and 11 o"clock and when the distributor seats the rotor must point at 5 o clock. it will not be centered on the #1 cylinder position, but a little before.

Mar 04, 2013 | 1996 Jeep Grand Cherokee

1 Answer

Can you conver front axel u joint type to a cv joint type on an 95 jeep grand charokee lorado


I owned a 93 GC 4x4 and I did replace my front axles with CV joint axles. The new axles came with CV joints, with a rubber boot and all so yes you can.

Sep 09, 2012 | 1995 Jeep Grand Cherokee

1 Answer

2000 jeep gc laredo 4x4 4.7 auto The front end shakes


if it shakes over 50 miles per hour, it could be your front tires need balancing. and check your ball joints while you are at it. or king pins if it has that. (they are different from ball joints but serve the same purpose.)

May 14, 2010 | 2000 Jeep Grand Cherokee

1 Answer

1996 Jeep Grand Cherokee Laredo 4X4 4.0L. Just recently bought and there's a popping noise in the front and when turning sharply it's like the wheels lock and the jeep refuses to move and it's also...


sounds like a bad cv joint in one (or both) of the front axles. is the popping sound more prevalent when in reverse, with the wheel turned? if so, i'd assume that it is a bad cv joint and one or both front axles will need to be replaced.

Feb 05, 2010 | 1996 Jeep Grand Cherokee

2 Answers

Front end jumps when I make slow turns in my 1996 Jeep Grand Cherokee Laredo.


Hi, check your tyre sizes, transmission windup can occur if wrong size tyres are fitted or one set are worn more than the other axle,

Jun 22, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Rear diff problem


The only place you did not mention is the pinion seal (at the yoke where the driveshaft connects) Any leak from a differential should be fairly obvious...clean everything off well and drive it, You should see seepage somewhere. Any grease on the wheels or new fluid where you cleaned will tell you where to look. If it is at the pinion seal, If you haven't done this before, don't...you can disturb the adjustment inside the gear case and damage the gears.

May 27, 2009 | 1996 Jeep Grand Cherokee

4 Answers

Rear end (axle)


call jeep and give them last 9 digits of your vin and ask for three things -Differential Type,Gear ratio, and Track lock- They will give you
1) Dana 35 or 44
2) Gear Ratio 3.31 or 3.73
3) Track Lock - yes/no

Jan 11, 2009 | 1998 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...