Question about 2007 Volkswagen EOS Convertible

Open Question

I need to replace the low beam bulb on my 2007 VW EOS.

How is this done?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 147 Answers

SOURCE: 99 VW Passat. Low beam headlight not working.

you need to change the bulb an your local parts store will show you how

Posted on Nov 27, 2008

Ad
  • 2 Answers

SOURCE: How to replace a headlamp on 2005 VW Beetle

Are you still looking for help with replacing headlights for 2005 VW.
If so , I have to replace mine tomorrow , I can photograph the process if that helps..

Posted on Mar 10, 2009

  • 10 Answers

SOURCE: replace low beam bulb in 2005 jetta

  1. Open the vehicle's hood and secure it in an upright position.
  2. Disconnect the negative battery cable.
  3. Remove the socket cover by pulling it straight off, or turning it clockwise then pulling it off.
  4. Carefully twist the bulb and socket counterclockwise, then pull the assembly from the headlight housing.
  5. Holding the base of the bulb, detach it from the connector harness.

To install:
  1. Holding the base of the bulb, install it securely in the connector.
  2. Install the connector and bulb assembly in the housing and twist to lock into position.
  3. Install the sealing cover by pushing it on and/or turning it counterclockwise. Make sure the cover is installed securely or the lens will be out of focus, or water may get into the light unit.
  4. Disconnect the negative battery cable and check the headlight operation.

Posted on Jun 02, 2009

FixinFax
  • 3085 Answers

SOURCE: 2003 no low bwa=eam or running light..bulbs and

Relay 173 has been removed, maybe by the previous owner.

Posted on Jun 17, 2009

alicantecoli
  • 22219 Answers

SOURCE: I have to replace the

their is a cip that holds it in ,one prong to push down and outwards ,if you cannot do take the headlight out its easier

Posted on Sep 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 jeep compass low beam doesnt work


Check the fuse for that side yes you have a fuse for each high and low beams for each side

Mar 26, 2013 | 2007 Jeep Compass 2.4

1 Answer

What is the easiest way to change a low beam bulb on a 2007 aura


LOOK IN GLOVE COMPARTMENT FOR OWNERS MANUAL.LOOK IN BACK INDEX OF MANUAL FOR BULB REPLACEMENT OWNERS MANUAL WILL SHOW AND TELL YOU HOW TO REMOVE AND REPLACE BULBS. BE SURE TO WEAR CLEAN LATEX GLOVES WHEN HANDLING THE BULBS BECAUSE BOTH LOW BEAM BULBS AND HIGH BEAM BULBS ARE HALOGEN IF TOUCH WITH HANDS OILS FROM SKIN WILL CAUSE HALOGEN BULBS TO OVER HEAT AND BLOW. HALOGEN BULBS NOT CHEAP THEY COST RANGE $10.00 TO $20.00

Sep 02, 2011 | 2007 Saturn Aura XR Sedan

1 Answer

2000 VW New Beetle 1.8T low beam bulbs not


it may be a blown fuse on the low beam circuit,check the fuses,if the fuses are OK check the bulbs.....hope this helps.....cheers

Jul 18, 2010 | 2000 Volkswagen Beetle

1 Answer

How do i replace a low beam head light on a 94' camry ?


Things You'll Need:
  • #H11-55W and #9005 replacement bulbs (low- and high-beam bulbs for 2007 and later models)
  • #9006 and #9005 replacement bulbs (low- and high-beam bulbs for 2002-2006 models).
STEPS TO REPLACE HEAD LIGHT: Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off. Open the hood using the primary and auxiliary hood release latches. Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced. Turn the headlight bulb socket counterclockwise to remove it from the assembly. Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.

Dec 05, 2009 | 1994 Toyota Camry

1 Answer

How d i adjust my 2007 vw jetta headlights bacause i can practically see the sky at night when i'm driving instead of the road


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Sep 03, 2009 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

99 VW Passat. Low beam headlight not working.


you need to change the bulb an your local parts store will show you how

Nov 26, 2008 | 1999 Volkswagen Passat

Not finding what you are looking for?
2007 Volkswagen EOS Convertible Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...