Question about Cars & Trucks

Open Question

How to replace the head gaskets on a 98 grand prix

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Pontiac Grand Prix 98

When the window is not used often or gets a little older the motor can "Hang Up" You might try having someone hold the down switch on the drivers door while you slam the door. This will sometimes jar the motor enough to make the brushes contact and start working.

Posted on Oct 04, 2008

  • 651 Answers

SOURCE: 98 grand prix gtp starts the turns off

check fuel filter.

Posted on Dec 29, 2008

csmock132
  • 4669 Answers

SOURCE: pontiac 3.1 with blowed head gasket

Are you sure it needs a head gasket? These are common for just having leaking intake gaskets and that is alot easier and cheaper to fix.

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: '98 grand prix GTP belt tensioner replacement

I didnt have to remove my alternator, I just used a 15 mm wrench to remove the left-hand threaded bolt holding the tensioner on. hope this helps

Posted on Jul 21, 2009

  • 5 Answers

SOURCE: how much to change a oil pan gasket for 2001 grand prix 3.8 gt

If you want to repair the oil pan I would also check lower engine mount for leaking oil and cracks in anti sway bar near fitting's. This due to engine mount is oil filled. OEM sway bar is made of tubular steel and they crack easy. Replacement sway bar is solid steel. Here's the kicker. When they pull the lower frame to service oil pan. The engine mount and sway bar are attached to that frame. A honest mechanic should only charge for parts ($35 for mount and $100 for sway bar) and maybe a extra hour. My mechanic did all in 5 hours. FYI gasket is only $35 bucks. Good luck

Posted on Mar 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to tell if i have a blown head gasket on my 2004 pontiac grand prix


The only way to know for sure is to pull the heads and check the head gaskets.
Oil in the cooling system or coolant in the crankcase is usually a sign of a gasket failure.

Aug 03, 2012 | 2004 Pontiac Grand Prix

2 Answers

(1999 pontiac grand prix 3100 SE v6) where is my head gasket located and how do I replace it? Diagrams are welcome!


CYLINDER HEAD GASKET LOCATED BETWEEN CYLINDER HEAD AND CYLINDER BLOCK.YOU CAN GO TO ANY AUTO PARTS STORE BUY A CHILTON OR HAYNES REPAIR MANUAL.IT WILL HAVE PHOTOS WITH HEAD GASKET.

May 25, 2011 | 1999 Pontiac Grand Prix

1 Answer

What is 2004 grand prix gt 3.8 engine head torque table


Go to autozone.com create a free account put in you cars model year etc... then look at the free manual for replacing head gasket it will have a bolt tightening sequence diagram. also they usually have to be taken off in a paticular sequemnce to avoid warping the head. If aluminum heads they usually recommend new head bolt set and having the head shaved (Leveled)

Jul 13, 2010 | 2004 Pontiac Grand Prix

1 Answer

Grand prix has a 3.1 6cyl. and 166000 mile, it blow white smoke


Sorry to inform you of the bad news but the white smoke is engine coolant burning off and the rough running condition is also associated with coolant leaking into the combustion chambers.This will be a head gasket repair, basically a head job where you will need to machine the heads down and install new gaskets from the heads up.Get back to me if you have any more questions, thanks and I hope I could help!!!

Apr 11, 2010 | 1999 Pontiac Grand Prix

1 Answer

What years 3.1 engine will fit in 1998 pontiac grand prix


Unfortunately it's a (relatively) one year only engine (without major component changes). However, these will fit without those changes:

'97, '98, '99 Buick Century,

'98, '99 Lumina (car),

'98, '99 Grand Prix,

'99, Monte Carlo.

This is assuming that you have an (8th digit) "M" VIN. Off the top of my head.


Mar 07, 2010 | 1998 Pontiac Grand Prix

1 Answer

I have a pontiac and i keep blowing head gasket on number one cylinder. I have installed new heads and gasket lasted about five years. I was wondering what the correct head bolt torque is for a 1995...


cylinder head bolts, step one;33 ft. lbs, second step rotate an additional 90-degrees (1/4 turn). do not put any oil or sealant on gasket. the gasket should seal itself if torqued properly.

Feb 27, 2010 | 1995 Pontiac Grand Prix

1 Answer

02 GRAND PRIX 3.8 "K" VIN MISSFIRE ON CYLINDER 5 MECHANIC REPLACED F.I. CHANGED WIRE AND PLUG AND COIL SERVICE LIGHT STILL ON AND FLASHES INTAKE MANIFOLD REPLACED A COUPLE YEARS AGO 10O K ON ENGINE


take plug,wire,coil and swap with another cylinder if still #5 missing could be head gasket or intake gasket leaking could also be fuel delivery problem

Sep 26, 2009 | 2002 Pontiac Grand Prix

1 Answer

Leaking radiator fluid


broken head trust me gasket wont help u

Nov 21, 2008 | 1994 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...