Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: How do I remove the
I have a suzuki esteem 2000 and to remove the inside of the door panel you must first locate the window roll down lever and when you push back on the panel it opeans up a gap between the lever and the panel and if you look there is an axile that connects to the lever and in the lever there is a set of groovs and if you look at the groves there is a snap on ring, you must first push that ring off of the axile which will let you to freelly pull the lever off and then you can locate the screws that also hold the panel on my suzuki I have one on the handle which is covered by a plastic cap and there is also another palstic cap a little lower. After you have freed the screws the rest are just snap on clips you can just pull the panel off.
well hope it was helpfull.
Posted on Sep 12, 2008
SOURCE: Door Panel removal
remove all visable screws from panel and arm rest. Arm rest should come off. Use a flat thin tool or piece of metal and slip it between the panel and the metal door frame. Slip it in about 2 inches,. Slide it back or forth til you hit a stop. That should be a plastic pop in.twist metal tool to pull panel away from the door. It should pop away from door frame. Don't overdo it if it doesn't come out. try another spot. once you get one loose, you can tell how to get the others out. Once panel is loose push it upwards to get top lip out of window bottom. If it has power windows,disconnect plug. If it has manual windows, you will have to remove the window crank There is a snap ring behind window crank that has to be removed.push in on panel by window crank and you can see the ring.
Posted on Dec 06, 2008
you answered your own question,ease the door panel with two screwdrivers ,one either side of the plastic clip and watch for the mastic
Posted on Jan 23, 2009
remove phillips scew and the door handle. remove padded arm rest on the door by lifting it up, and remove 2 screws. You can use a panel tool to remove the plastic toggle like pins holding the panel border in. Be as gentle as possible they may break due to becoming brittle.
Posted on Apr 06, 2009
You most likley have a damaged inside door handle. To remove the door panel, you must first remove the handle bezel. The trim piece around the handle. It is held in place by 4 retainer tabs, take a small flat screw driver, insert it between the bezel and handle. Gently pry away from the handle. If you look in the crack around the handle you will see the tabs. When you get that off, remove the switch assembly by prying up on it gently, unplug the wiring. There are 2 screws in the door panel where you pull the door shut, remove those also. Start at the bottom front of the door panel, pull outward firmly, but not violent. The retainers will come out, you will most likley break some, this is common. The inside handle is about $45 from your dealer. If it is the handle it is held in with 1 rivit, drill it out with a 3/16 drill. Replace the handle, reassemble. Good Luck.
Posted on May 05, 2009
Tips for a great answer:
Apr 21, 2017 | Suzuki Baleno Cars & Trucks
Nov 21, 2015 | Suzuki Cars & Trucks
Jul 21, 2015 | Suzuki Cars & Trucks
Feb 26, 2015 | 1997 Suzuki Baleno
Sep 12, 2014 | Cars & Trucks
Mar 19, 2011 | Suzuki Swift Cars & Trucks
Sep 15, 2009 | 1999 Suzuki Esteem
Apr 14, 2009 | Suzuki Aerio Cars & Trucks
Feb 05, 2009 | 2000 Suzuki Esteem
415 people viewed this question
Usually answered in minutes!