Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Relieve the fuel pressure and disconnect the negative battery cable.
2. If not already removed, depress the clips on each end of the rear seat cushion and remove the cushion.
3. If not already done, detach the electrical connector from the fuel pump/sending unit.
4. Remove the attaching screws from the fuel pump/sending unit access cover and remove the cover.
5. Disconnect the fuel supply and return hoses from the fuel pump/sending unit.
6. Remove the attaching screws and the fuel pump/sending unit from the fuel tank.
7. Detach the sending unit electrical connector, remove the sending unit attaching nuts and remove the sending unit from the fuel pump assembly.
1. Attach the sending unit to the fuel pump assembly and install the nuts. attach the sending unit electrical connector.
2. Install the fuel pump/sending unit into the fuel tank with a new gasket and install the mounting screws.
3. Connect the fuel supply and return lines.
4. Install the access cover and the mounting screws.
5. Attach the sending unit electrical connector.
6. Position the rear seat cushion over the floor, making sure to align the retaining pins with the clips. Push down firmly until the two retaining pins are locked into the rear seat retaining clips.
7. Connect the negative battery cable, start the engine and check for proper system operation and for fuel leaks.
Posted on Jun 13, 2009
JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..
Posted on Mar 11, 2009
yes it isn't that much if you buy them.they slide inside the coupler and release the line.
Posted on Dec 27, 2009
Testimonial: "Thank you didn't know if there was a tool for this."
while you are replacing it, replace the sock at the same time. That is the only "filter" that I am aware of. I had a problem that mimicked a slipping transmission that was because of the sock breaking down. When ever it got low on fuel, the transmission would act up.
Posted on Apr 18, 2010
The pump is in the tank. Before you consider dropping the tank. Lift the carpet in the back seat above the tank. The older MPVs had a trap door which would access the pump with out dropping the tank. It is definitely worth a look. I changed mine in half an hour.
Posted on May 14, 2010
Tips for a great answer:
May 25, 2015 | 2000 Mazda 626
Jun 07, 2012 | 1999 Mazda Millenia
Mar 31, 2011 | 2000 Mazda MX-5 Miata
Pull the fuel pump down so that it is tight against the bracket.
Oct 14, 2010 | 2000 Mazda MX-5 Miata
May 03, 2010 | 2000 Mazda Protege
Jan 10, 2010 | 2001 Mazda Millenia
Jul 17, 2009 | 2000 Mazda Millenia
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: