Question about 2005 Nissan Altima 2.5

Open Question

Harmonic balancer Torque specs for 2005 nissan altima 2.5

Harmonic Balancer bolt

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

BCAS1298
  • 3092 Answers

SOURCE: what are the torque specs

Rod cap nut's

Step 1 -10-12 Ft.LBS
Step 2 - 60-65 Additional Degrees


Head Bolt's

Step 1 - 22 Ft.LBS
Step 2 - 59 Ft.LBS
Step 3 - Loosen all bolt's
Step 4 - 22 Ft.LBS
Step 5 - 86-91 Additional Degrees

bcas1298_8.gif

Posted on Dec 11, 2010

  • 1 Answer

SOURCE: BAD HARMONIC BALANCER

To remove the harmonic balancer on my 1992 Pathfinder, I needed to loosen the alternator and power steering belts, remove the cooling fan (4 10 mm nuts), remove the radiator (2 10 mm  bolts hold it to the frame, remove top and bottom hose [The drain **** is covered by what appears to be a coolant line], as well as the overflow tube to the reservoir. With a 3/4" impact gun and a 27 mm socket, remove the bolt that retains the alt, ps shieves and the harmonic balancer to the crankshaft. With a large 3 jaw puller, remove the harmonic balancer with the pully sheives as an assembly. I do not recommend attempting the removal without the puller.
To  put it back on, you will need a large torque wrench for the crankbolt and a small torque wrench for with a crowsfoot for the fan nuts.

Posted on Dec 01, 2008

seans46
  • 161 Answers

SOURCE: how to remove a harmonic balancer bolt from a 98 nissan maxima

In the past I have had to use a 1 inch impact to brake that bolt loose. It is a monster and it is regular thread. If you dont have a big compressor and super impact I have held the engine a made a breaker bar and broke it loose that way and make sure to keep spraying it.

Posted on May 24, 2009

  • 508 Answers

SOURCE: which way do i turn the bolt on the harmonic balancer to lossen i

righty tighty lefty loosey

Posted on Jun 30, 2009

NismoMaster
  • 146 Answers

SOURCE: i need a how to to change harmonic balancer for 1995 nissan max

First remove right front tire and support vehicle with a jack stand. Remove splash guard lower portion near the harmonic balancer. Remove all drive belts. First remove the A/C alternator belt. Loosen the 14mm bolt at the front of the belt tenioner and then loosen the tensioner bolt (it is the one that stands out, you use a socket on it.). The power steering adjuster bolt with be gained from the bottom. It has a 12mm bolt head on it. You will break the jamb bolt loose first and then loosen the adjusting bolt. Pull down on the belt the help move it after you've loosened it some.Then remove harmonic balancer bolt (19mm).If the harmonic balancer will not slide off the crankshaft then use a two finger gear puller. Place the harmonic balancer bolt back in the crankshaft but do not tighten it. Leave it about a half inch from being all the way in. Next place the puller onto the harmonic balancer (one finger on each side securely press into the belt groove. The center puller bolt will rest against the harmonic balancer bolt head. Tighten the puller bolt and make sure the harmonice balancer bolt does not turn. The balancer should come off at this point.

Posted on Aug 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT IS THE HARMONIC BALANCER TORQUE SPECS FOR A 2002 2.7L DODGE INTREPID?


This is for a 5.7 Ram
the torque should be 150-180 ft lbs. anywhere in this range is good.
http://www.fixya.com/cars/t8915727-need_know_torque

Register at this website to get all the torque specs.

http://www.autozone.com/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f8037c5e2

Aha, I took me 30 minutes, but here you go. The secret was the change of search query wording to;
2002 2.7 DODGE INTREPID TORQUE SPECS crankshaft damper

(198) Install damper center bolt. Tighten center bolt
while holding the damper with Special Tool 8191 to
170 N•m (125 ft. lbs.) (Fig. 76).

http://www.dodgeintrepid.net/18-general-discussion-second-generation/61664-so-your-2-7-ready-some-100k-repairs.html


WHAT IS THE HARMONIC BALANCER TORQUE SPECS FOR 2002 2 7L DODGE INTREPID...

Jan 11, 2017 | 2002 Dodge Intrepid

1 Answer

Torque specs for the harmonic balancer on a 1994 buick roadmaster


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Oct 18, 2016 | 1994 Buick Roadmaster

2 Answers

Torque spec for 1RZ harmonic balancer


how can i set a toyota 1rz engine on timing

Jul 19, 2012 | Cars & Trucks

1 Answer

Torque specs for 2005 nissan altima 2.5


According to Haynes Manual, 2005 Nissan Altima, using BRAND NEW cylinder head bolts:

1 - Tighten in sequence (as pictured) to 37 ft-lbs.
2 - Tighten an additional 60 degrees.
3 - Loosen all bolts completely.
4 - Tighten in sequence 26 - 32 ft-lbs.
5 - Tighten in sequence an additonal 75 degrees.
6 - Tighten in sequence an additional 75 degrees.

Mar 23, 2012 | 2005 Nissan Altima 2.5

1 Answer

How much torque required on 2005 Buick Renzvous harmonic balancer?


3.4L V6 harmonic balancer bolt

step 1 52 ft lbs.

step 2 additional 72 degrees

3.6L V6

step 1 74 ft lbs.

step 2 additional 150 degrees

May 21, 2011 | 2005 Buick Rendezvous

1 Answer

How do you replace the harmonic balancer pulley on the 2000 oldsmobile intrigue


The short answer to your question is:

1. Raise the car on the passenger side and remove the front wheel.
2. Remove the belts on the harmonic balancer.
3. Remove the retaining bolt.
4. With a puller, jack the harmonic balancer off of the crank shaft. You can rent a puller at your local auto parts store. It is easiest to access the harmonic balancer through the fender, hence the need to remove the wheel.
5. You should also consider replacing the seal around the harmonic balancer to minimize the possibility of a leak later.
6. Install the new harmonic balancer and tighten the retaining bolt to the specified torque (I don't know this off the top of my head).
7. Replace the belts and wheel, and voila...mission accomplished.

This was a short answer to your question. You may wish to consult a repair manual for illustrations, torque specifications, additional instructions, etc. This job is not for the faint of heart. Good luck!

Feb 19, 2010 | 2000 Oldsmobile Intrigue

1 Answer

I need a how to to change harmonic balancer for 1995 nissan maxima. step by step


First remove right front tire and support vehicle with a jack stand. Remove splash guard lower portion near the harmonic balancer. Remove all drive belts. First remove the A/C alternator belt. Loosen the 14mm bolt at the front of the belt tenioner and then loosen the tensioner bolt (it is the one that stands out, you use a socket on it.). The power steering adjuster bolt with be gained from the bottom. It has a 12mm bolt head on it. You will break the jamb bolt loose first and then loosen the adjusting bolt. Pull down on the belt the help move it after you've loosened it some.Then remove harmonic balancer bolt (19mm).If the harmonic balancer will not slide off the crankshaft then use a two finger gear puller. Place the harmonic balancer bolt back in the crankshaft but do not tighten it. Leave it about a half inch from being all the way in. Next place the puller onto the harmonic balancer (one finger on each side securely press into the belt groove. The center puller bolt will rest against the harmonic balancer bolt head. Tighten the puller bolt and make sure the harmonice balancer bolt does not turn. The balancer should come off at this point.

Aug 26, 2009 | Nissan Maxima Cars & Trucks

2 Answers

BAD HARMONIC BALANCER


this site is lame ,i just called a dealership and got the answers i needed,i got no help here

Nov 25, 2008 | 1998 Nissan Pathfinder

1 Answer

Harmonic balancer


Check out this link: http://www.autozone.com/addVehicleId,1602402/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c152800cc1e1. This is for a 6 cylinder in your year. This gives you the specs for all of the bolts associated with the crankshaft damper. Good Luck!

Jul 16, 2008 | 1991 Buick Century

Not finding what you are looking for?
2005 Nissan Altima 2.5 Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...