Question about 2000 Isuzu Rodeo

1 Answer

What is the cost of an Idler pulley for a 2001 rodeo

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 14,384 Answers
Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 86 Answers

SOURCE: How many idler pulleys does a 1998 Isuzu rodeo have?

is the car runnig fine? there should only be 1

Posted on Aug 24, 2009

stevenhurc
  • 450 Answers

SOURCE: which pulley is the idler pulley on a 2001 isuzu

stevenhurc_2.jpg 1=crank
2=alternator
3=idler tensioner
4=IDLER
5=fan idler
6=air cond compressor
7=accessory drive belt(serpentine belt)
8=power steering pump

just in case this is the timming belt and pulleys

stevenhurc_3.jpg

Posted on Feb 03, 2011

  • 97 Answers

SOURCE: I have a 2001 Isuzu

Typically, the noise comes from the fact that the tension on the altenator belt is not enough. I recommend you tighten the belt by adjusting the tensioner screw by about (2) turns and test. Repeat it as necessary until the noise stops.

You'll usually hear the noise right at start up and it will continue for close to a minute until the idle of the car changes.

Posted on Jun 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Isuzu serpentine belt routing diagram for 6VE1, 6VD1, Rodeo, Trooper and Axiom...


Serpentine belt routing diagram for an Isuzu V6 cylinder engine. 6VE1, 6VD1 as fitted to Rodeo, Trooper and Axiom
4b4418d.jpg

  1. Crankshaft pulley
  2. Tensioner
  3. Alternator
  4. Idler pulley
  5. Power steering
  6. Airconditioning compressor
  7. Cooling fan pulley

on Sep 07, 2010 | Isuzu Trooper Cars & Trucks

1 Answer

2001 holden rodeo air conditioning broken, broken fan belt, suitable fanbelt to bypass aircon


Use the same belt as the ac compressor will not work unless you turn it on. Disconnect the wire to the ac pulley clutch and the pulley just becomes an idler and you can get the standard belt anywhere.

Dec 16, 2013 | Cars & Trucks

1 Answer

Loosen belt isuzu rode 1993


Depending on which engine and which belt, you may have a tensioner that is spring loaded. It is pushed aside by using a large pry bar or 1/2 inch breaker bar.
The 4 cyl engine uses V belts, so you should have an idler pulley which is adjusted with a bolt. You loosen the bolt in the pulley then turn the adjusting bolt.

Jul 29, 2012 | 2001 Isuzu Rodeo

1 Answer

I have a 2001 Isuzu Rodeo. When starting, it has a loud skreeching noise and when theres a load on it. I have replaced the belt, 2 idler pulleys, alternator, a dummy water pump pulley, and the ac. Still it...


Typically, the noise comes from the fact that the tension on the altenator belt is not enough. I recommend you tighten the belt by adjusting the tensioner screw by about (2) turns and test. Repeat it as necessary until the noise stops.

You'll usually hear the noise right at start up and it will continue for close to a minute until the idle of the car changes.

Jun 17, 2011 | 2001 Isuzu Rodeo

1 Answer

How do i replace the water pump on a 1997 rodeo v6?


YOU HAVE TO REMOVE TIMING BELT AND IDLER PULLEY.YOU NEED TO REPLACE TIMING BELT WHEN YOU REPLACE WATER PUMP.TO REPLACE WATER PUMP. DRAIN COOLANT SYSTEM.REMOVE UPPER RADIATOR HOSE.REMOVE TIMING BELT AND IDLER PULLEY.UNBOLT AND REMOVE THE WATER PUMP.CLEAN ANY GASKET MATERIAL OR SEALANT RESIDUE FROM THE WATER PUMP MATING SEALING SURFACES.WHEN INSTALLING NEW WATER PUMP BESURE TO USE A SEALANT ON BOTH SIDES OF WATER PUMP GASKET TO KEEP IT FROM LEAKING COOLANT.TORQUE WATER PUMP BOLTS TO 13 FT LBS IN A TWO STEP CRISSCROSS SEQUENCE.INSTALL THE IDLER PULLEY.TIGHTEN THE MOUNTING BOLT TO 31 FT LBS.INSTALL AND TENSION THE TIMING BELT.INSTALL THE UPPER RADIATOR HOSE.REFILL BLEED THE COOLANT SYSTEM.

Feb 19, 2011 | 1997 Isuzu Rodeo

1 Answer

Which pulley is the idler pulley on a 2001 isuzu trooper 3.5L,DOHC motor?


stevenhurc_2.jpg 1=crank
2=alternator
3=idler tensioner
4=IDLER
5=fan idler
6=air cond compressor
7=accessory drive belt(serpentine belt)
8=power steering pump

just in case this is the timming belt and pulleys

stevenhurc_3.jpg

Jan 31, 2011 | 2001 Isuzu Trooper

1 Answer

How do i install a water pump for an Isuzu Rodeo, V.7 3.2 liter


Isuzu_Rodeo_Rodeo_Sport_1997-2004
Water Pump - Removal and Installation

3.2L Engines
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    Negative battery cable Upper radiator hose Timing belt. Refer to the Timing Belt procedure. Idler pulley Water pump
To install:


d2081b9.jpg

Fig. Exploded view of the water pump mounting

3702807.jpg

Fig. Water pump torque sequence. Apply LOCTITE® 262 to bolt number 3 (arrow)-3.2L and 3.5L engines

NOTE Apply Loctite® 262 to bolt number 3 prior to installation.
  1. Install or connect the following:
    Water pump. Tighten the bolts in two passes, in sequence, to 18 ft. lbs. (25 Nm). Idler pulley. Torque to 38 ft. lbs. (52 Nm). Timing belt Upper radiator hose Negative battery cable
  2. Fill the cooling system.
  3. Start the engine and check for leaks.

3.2L Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Drain the cooling system.
  3. Remove or disconnect the following: Negative battery cableRadiator hoseAccessory drive beltFront coverTiming belt. Refer to the Timing Belt unit repair section.Timing belt idler pulley Water pump
    Negative battery cable Radiator hose Accessory drive belt Front cover Timing belt. Refer to the Timing Belt unit repair section. Timing belt idler pulley Water pump

To install:

e6f48ad.jpg

Fig. Water pump bolt tightening sequence-3.2L engines
  1. Install or connect the following: Water pump. Tighten the bolts in sequence to 18 ft. lbs. (25 Nm).Timing belt idler pulley. Tighten the bolt to 38 ft. lbs. (52 Nm).Timing beltFront coverAccessory drive beltRadiator hoseNegative battery cable
    Water pump. Tighten the bolts in sequence to 18 ft. lbs. (25 Nm). Timing belt idler pulley. Tighten the bolt to 38 ft. lbs. (52 Nm). Timing belt Front cover Accessory drive belt Radiator hose Negative battery cable

  2. Fill the cooling system.
  3. Start the engine and check for leaks.

Hope this help (remember rated and commento).

Mar 19, 2010 | 1997 Isuzu Rodeo

Not finding what you are looking for?
2000 Isuzu Rodeo Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...