Question about Cars & Trucks

Open Question

Howto find a vacuum leak 97 chevy pick up V 6 vortex engine

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 126 Answers

SOURCE: vacuum leak in dash- 97 areostar..

The leak is from the Vacuum Motors on the Air Distribution Box for the Climate Control system. Please go back to your transmission and check it for Trans Fluid in the Vacuum line going to the Trans Vacuum Module. The Module will be on passenger's side of trans near the Trans Pan, there may be a shield covering it. Pull the line off the module & see if fluid comes out

Posted on Oct 28, 2009

Ad
  • 3 Answers

SOURCE: vacuum leak

autozone.com has the diagrams online find your exact truck and emissions versions

Posted on Oct 20, 2008

emissionwiz
  • 76630 Answers

SOURCE: need how to find TDC on 4.3 v-6

Remove # 1 plug and stick your finger in the hole, roll the engine over by hand, when you start to feel pressure in the cylinder you are near TDC, just check the crank pulley marks to zero it to TDC mark on pulley.

Posted on Oct 21, 2008

  • 56 Answers

SOURCE: the problem is a water leak i discovered leaking

uper radiator hose...replace the o ring gasket of the thermostat element...

Posted on Jul 02, 2010

ZJLimited
  • 17970 Answers

SOURCE: #10 emc/ign fuse keeps blowing.i have a 97 chevy s10 4.3 vortex engine changed the fuel pump but still keeps blowing fuses,what can i do

Short there; check wires and harnesses connections and ground.

Posted on Feb 22, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 chevy 1500 sputters at idle in gear can feel it a little while driving no cat. past 2 years run bank1 lean code plugs clean HELP


If the engine is misfiring the check engine light would be on and blinking and the engine control module (PCM) would store a fault code or codes for the cylinders that are misfiring. A lean code will not cause a misfire unless the engine has a vacuum leak most often at the intake manifold gaskets. A misfire code looks like this:

P0300-P0306 for 6 cylinder and P0300-P0308 for a V8.
P0300 indicated a random engine misfire, this can be caused by all kinds of issues.

Feb 24, 2017 | Cars & Trucks

1 Answer

I was given a 1994 s10 Chevy Tahoe vortex blazer


I was given a 1994 s10 Chevy Tahoe vortex blazer??????? It's either a S-10 pick-up or it's a Tahoe or a Blazer not all three . So which is it ?

Mar 11, 2017 | 1994 Chevrolet S-10 Blazer

1 Answer

My husbands 97 chevy pick up with the vortex engine stalled while i was driving it the other day acted like it ran out of gas stalled 8 times in 4 miles but then would restart each time we replaced the...


, i had this problem on my truck had to get another fuel pump, which was oem, it pumps more gpm.
the injectors won't open if not enough pressure, sorry

Mar 15, 2011 | Chevrolet C1500 Cars & Trucks

1 Answer

97 chevy pu 305 vortec, had cyl 6 misfire and rough idle, replaced fuel injector spider now engine starts but idle real high then dies


thats usually a sign of a vacuum leak, recheck and make sure you don't have any loose hoses, or cut intake seals

Nov 12, 2010 | 1997 Chevrolet C1500

1 Answer

I have a 97 chevy truck the ac just stop working only blows from the bottom and hot and i also check all the relays and fuses all check out good


check for vacuum leaks. inspect vacuum lines in engine compartment going ito fire wall just under heater hoses. also listen for vacuum leaks behind dash board. it is normal to hear a slight hissing when the mode door selector is moved into different positions for a few seconds.

Jul 08, 2009 | 1999 GMC Jimmy

1 Answer

Need how to find TDC on 4.3 v-6


Remove # 1 plug and stick your finger in the hole, roll the engine over by hand, when you start to feel pressure in the cylinder you are near TDC, just check the crank pulley marks to zero it to TDC mark on pulley.

Oct 21, 2008 | GMC Sierra 1500 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...