Question about Cars & Trucks
The EVP Sensor sits on top of the EGR Valve and whenever the EGR valve allows exhaust to re-enter the intake manifold it displaces good burnable air/fuel. This cools the combustion but also reduces the power that the cylinders produce. if you need an Car Key Programmer, click here: Car Key Programmer
Posted on Nov 07, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 95 maxima knock sensor
It should be on the top of the engine, normally under the intake towards the back of the engine,get the new sensor first so you have a visual reference of what the connector looks like
Posted on Mar 24, 2009
Your knock sensor is located Under the hood, center, front engine area, below intake
manifold, mounted on block.
A defective knock sensor may cause engine detonation or reduced spark advance and fuel economy. When a knock sensor is removed and replaced, the sensor must be tightened to its specified torque. If the knock sensor is installed tighter than it should be, it may become too sensitive and provide an excessively high voltage signal, resulting in more spark ****** than required. When the knock sensor is installed looser than it should be, the knock sensor signal will be lower than normal, resulting in engine detonation.
To replace the knock sensor:
Posted on May 15, 2009
Should be on the right side of the engine by the starter.Has a 1 wire connector.It does not go into the cooling system so you can just take it out without draining the coolant.Hope this helps.Good luck.
Posted on Jan 06, 2010
Tips for a great answer:
Jan 21, 2011 | 1996 Nissan Maxima
Jun 22, 2010 | 1999 Nissan Maxima
Nov 03, 2009 | 1997 Nissan Maxima
May 15, 2009 | 1997 Nissan Maxima
Aug 26, 2008 | 1995 Nissan Maxima
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: