Question about Chrysler Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
P0442, P0455 AND P0456 are all evaporative leak monitor test failures (small, medium and large leaks). These codes appear anytime the integrity of the air space above the fuel or the lines to/from the vapor canister or purge valve. If there is no damage to the canister, check the lines that run under the van from the fuel tank and canister to the purge valve (under the hood). Also, check to make sure that the hoses are not split or disconnected where they connect to the purge valve. The P1684 is abit more confusing. This is not a valid DTC for your vehicle. It's possible the scanner the shop you went to is an OTC scanner that is reporting a false code. It's also possible they wrote it down incorrectly. The closest thing that makes any sense is a P1486 which would indicate a pinched hose in the same monitor system as the other 3 codes. Best of luck!
Posted on Jun 20, 2008
Could be the gas cap. Do you fill the tank with the engine running?
Otherwise, check the hoses near the Evap canister. I have 2003 T&C and had the small leak and large leak codes. I looked at the evap cansiter and the hose coming from the fuel tank vapor line had a huge crack in it, to the point it had fallen off the evap caniser. I trimmed the end of the hose and reconnected and voila, no codes.
The evap canister is on the driver's side of the van, underneath, slightly behind the drivers seat.
BTW, to clear the codes without an OBDII reader, remove the negative cable for 5-10 minutes (15 to be safe). The computer resets and clears the codes, except for one that it sets saying loss of power to the memory.
Posted on Jan 24, 2009
The input and output speed sensors look identical on the connector side. The one over the solenoid pack is the input, the one closer to the left frame rail or left front wheel is the output sensor. I hope this helps.
Posted on Apr 26, 2009
the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays
Posted on May 08, 2009
Tips for a great answer:
Mar 03, 2013 | 2002 Chrysler Town & Country
Jun 20, 2011 | 2003 Chrysler Town & Country
Mar 19, 2011 | 2002 Chrysler Town & Country
Feb 04, 2011 | Chrysler Town and Country Cars & Trucks
Apr 03, 2010 | 2009 Chrysler Town and Country
Nov 14, 2009 | 2003 Chrysler Town & Country
Oct 26, 2009 | 2003 Chrysler Town & Country
Mar 25, 2009 | 2003 Chrysler Town & Country
161 people viewed this question
Usually answered in minutes!