Question about 1999 Cadillac DeVille
Sorry, there are no current prices on replacing leather seats for a 1999 Mazda. However, check out the web site and you may find a dealer who will replace the leather. www.mazdapartscenter.com if you
need an Car Key Programmer, click here:Car Key Programmer
if you need an Car Key Programmer, click here:Car Key Programmer
Posted on Nov 07, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Not a very common problem. You can get either the part from the dealer, or the seat from the junk yard. It will have the piece you need to correct the issue.
Posted on May 27, 2009
No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.
Posted on Dec 07, 2009
Testimonial: "Thanks for your assistance. Great information"
OK, I had the same problem with my 1990 Cadillac Deville. Had to go to a junk yard where they gave me the entire bolted on assembly. I got a 3/8" impact wrench and unbolted the belt buckle from the frame, and did the same to the one on the assembly they gave me. After that my buckle worked great. The color even matched the old one.
Posted on Jul 08, 2010
Please follow the instructions below carefully to change the bulbs in the licence plate of your cad deville;
1.All you have to do is put a flat blade screw driver on the right side of the bulb housing and gently push to the left. This will release the catch holding it in and it will drop out and down on the end of its wiring connector.
2.1/4 turn the bulb and remove. Replace the bulb and just put the housing back into the opening left side first, then just push up on the right side till you hear a click. Takes about 1 min per light. Works for all Deville types from 99-08
Posted on Aug 12, 2010
SOURCE: Why would the drivers seat
This is due to a bad switch or seatmotor, the seat uses diffrent motors to control the seat so seat can still tilt but not move back or forward, this best way to know which ic the problem is with a testlight, hold the switch to move forward or back and test for power and a ground to that motor, if theres power and ground then motor is bad, if theres no power then switch is bad, hope this helps.
Posted on Sep 04, 2010
Tips for a great answer:
Oct 04, 2014 | 2002 Cadillac Deville
Apr 18, 2013 | 2006 Chevrolet Tahoe
Mar 26, 2013 | 1996 Cadillac DeVille
Sep 12, 2012 | 2009 Chevrolet Impala
Apr 02, 2012 | 2004 Cadillac Deville
Oct 11, 2011 | 2003 Cadillac Deville
Aug 20, 2011 | 2001 Cadillac DeVille
Jun 12, 2011 | 1996 Buick Park Avenue
May 21, 2011 | 2000 Saturn SL
Aug 12, 2010 | 1999 Cadillac DeVille
446 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: