Question about 2005 Nissan Murano
Horn will not blow
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Close all vehicle doors, LOCK doors using drivers side switch.
Insert key all the way into the ignition, (do not turn) remove key.
Repeat this step 5 times. (6 total)
Hazards should flash to indicate program mode.
Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.
*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press any button on remote, hazards should flash. Repeat step as necessary.
Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.
Posted on Aug 06, 2008
On your remote, hold down the lock & unlock buttons at the same time for 2-3 seconds. This sets it in honk or no honk verification mode.
Posted on Mar 27, 2009
The horn doesn't use a fuse, instead it used a relay which is the large square black box you see in your fuse box. There should be one for your horn, blower motor (the blower that pushes the heat out the vents in your car) and a few other things.
Easiest way to see if it has gone bad is to switch the horn and blower motor relay and then try and use the horn and blower motor. If the horn works and the blower motor doesn't then you have a bad relay. You can go to any auto parts store and they will have them in stock.
Posted on Mar 03, 2010
I also had this problem along with a clunk sound when I turn my steering wheel. After disconnecting the battery for 30 min I proceeded to take off the 3 small covers on my steering wheel and then take off the 2 bolts that hold my airbag on. What I found was what looks to be a piece of metal the used to be attached to 3 small rubber pillars that went to a small thin piece of metal that was screwed into the steering wheel housing that had all 3 of the rubber pillars broken and big metal piece was just flopping around inside the steering wheel causing the horn to go off when I turned. No one can tell me what this part is so I just removed it and put it back together and every thing seems to be working fine now. It did not seem to have any thing to do with the Airbag as the airbag came off in 1 piece. It has been suggested to me that it was some sort of balancing weight for the steering wheel. Even the Nissan dealer could not tell me what it was. Any ways it seems fine with out it. DW
Posted on May 10, 2010
Well I don't recommend disconnecting seeings how the horns is a safety item. It is more than likely the clock spring in the steering wheel that is broken and when you turn to the left it makes contact thus allowing the horn to go off. I recommend fixing the problem. You might want to check out your local laws regarding non working safety items on your vehicle, you could actually set yourself up for other issues if you are to get into an accident and certain safety devices are not working.
Posted on Dec 31, 2010
Tips for a great answer:
Jul 28, 2015 | 2005 Nissan Murano
May 23, 2014 | 2005 Nissan Murano
Jan 21, 2014 | Nissan Cars & Trucks
Feb 19, 2011 | 2005 Nissan Murano
Dec 30, 2010 | 2006 Nissan Murano
Sep 03, 2010 | 2005 Nissan Murano
Jul 27, 2010 | 2003 Nissan Murano
Mar 09, 2010 | 2005 Nissan Murano
Mar 03, 2010 | 2005 Nissan Murano
336 people viewed this question
Usually answered in minutes!