Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 Escape starter replacement
take the negative side off the battery put the car on ramps secure the rear end so it does not roll and if you need a diagram for removing and installing the starter try autozone
Posted on Jan 29, 2009
You can purchase the wiring diagram for $5.99 from the following site: http://www.wiring-diagram.com/. You can also purchase a wiring diagram book from the following link: http://cgi.ebay.com/ebaymotors/2008-FORD-CROWN-VICTORIA-MARQUIS-WIRING-DIAGRAM-MANUAL_W0QQitemZ120394723100QQcmdZViewItemQQimsxZ20090320?IMSfp=TL090320147007r15080.
Hope this helps,
Posted on Mar 23, 2009
i would recommend buying a Haynes manual, as they have very good diagrams and schematics. If you do not want to buy one, though, you can create an online garage on Autozone.com by registering (which is free) and add your car to the garage to get access to a free manual online. These manuals are kind of hit-or-miss, though, and i have had mixed results with them. But for free, it is worth looking into first.
i hope this helps,
Posted on Oct 25, 2009
Chances are it is a bad ABS sensor. Need to get scanned to know for sure and which one.
Not much i know but I hope that helps.
Posted on Feb 03, 2010
The field wire to the starter has a small eyelet connector that connects to the small terminal on the starter solenoid (sometimes marked "S").
All other wires have a large eyelet connector and they are all connected together with the battery cable to the large terminal on the starter solenoid (sometimes marked "BAT").
Sometimes the field wire to the starter is a push on type connector, and there would only be one obvious terminal on the starter solenoid that it could be connected to.
Posted on May 02, 2010
Tips for a great answer:
Mar 29, 2016 | 2005 Ford Freestar
Oct 12, 2015 | 2008 Ford Focus
Oct 03, 2014 | 2008 Ford Escape
Jul 24, 2014 | 2008 Ford Escape
Feb 18, 2014 | 2008 Ford Escape
Sep 22, 2013 | 2008 Ford Escape
Jan 14, 2011 | Ford Escape Cars & Trucks
465 people viewed this question
Usually answered in minutes!