Question about Nissan Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
all you have to do is inspect the old trunk door how it is attached to the hinges.
be careful on the tension bars that are lifting the trunk. once you released them, the trunk would just fall down.
there are two of these tension bars, they are like springs to help you lift the trunk and they are very tricky to remove and install
after you have done that then it just a matter of removing 2 bolts on each side of the hinge and remove the trunk.
if you have electrical accessories attached to the trunk such as solenoids or trunk cables, remove them first.
then do the reverse on installation.
you may want somebody helping you hold to the trunk before you remove the bolts. they are heavy.
tnx 4 using fixya,
Posted on Sep 14, 2008
SOURCE: Front struts replacement
Jack up and secure front end of your vehicle,Take off two front wheels. Loosen to bolt on the bottom of struts (Its a bolt and nut). Remove clip that holds brake hose on to strut and remove hose. DO NOT OPEN BRAKE LINE OR DISCONNECT FROM CALIPER. Remove bolts and remove bottom of strut from knuckle/Hub assembly. Then loosen nuts on strut tower( on top of fender inside hood) (3) nuts, mark exact locations of each nut on strut mount area on upper fender weld. Make sure to hold strut on the bottom so it doesn't drop down on caliper and knuckle or on you possibly.YOU WILL NEED A SPRING COMPRESSOR to compress spring so you can take struts off. MAKE SURE THAT SPRING IN COMPRESSED/SQUEEZED WITH A STRUT COMPRESSOR. Then loose center nut on strut tower(may be covered with a circular rubber cover) If nut spin around with out getting loose use vise grips to hold strut rod ONLY TO REMOVE STRUT NOT TO INSTALL. if you use vise grips to install it will damage strut. When nut is off, remove strut and reinstall new one transfer all rubber boots and cushions from old strut. Good Luck thanks for using FIX-YA.com contact me if you need more help.
Posted on Dec 30, 2008
hi..check on the following link to replace the
check it out..
Posted on Mar 06, 2009
There is a problem with the fuel pump. This is a known problem with the 2006 Sentra and the dealer should have known this. Get your money back
Posted on Mar 20, 2010
usually with a serpentine belt the trick is the tensioner. You need to be able to move it to release and replace the belt. the only other thing is the routing of the belt. several special tools are sold to move the tensioner. some are long bars with different types of attachments and some a ratcheting bars with the same attachments. Sometimes you can do it with a standard retchet but not always. Wish i could be of more help maybe you have a harbor freight in your area and they sell an inexpensive one you can use. good luck
Posted on May 02, 2010
Tips for a great answer:
Apr 03, 2015 | 2006 Nissan Sentra
Aug 28, 2014 | 2008 Nissan Sentra 2.0
Jul 19, 2012 | 2006 Nissan Sentra
Feb 21, 2011 | 2002 Nissan Sentra
May 01, 2010 | 2006 Nissan Sentra
Apr 29, 2010 | 1995 Nissan Sentra
Feb 18, 2010 | 2006 Nissan Sentra
Jul 07, 2009 | 2006 Nissan Sentra
Mar 06, 2009 | 2006 Nissan Sentra
540 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: