Question about 2000 Ford F250 Super Duty Crew Cabs

Open Question

How to replace a clock spring in a 1999 ford f250 steering colum

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

warlock61
  • 659 Answers

SOURCE: 2004 Ford F250 Superduty Truck Steering problems

I have had this same problem after thorough checking it ended up being a bad steering box. after replacing the box it was fine

Posted on Nov 22, 2008

  • 2 Answers

SOURCE: 1997 ford f250 steering problem

it could be the front axle u-joint binding up. i had the same problem, and that's what it was. i put greaseable u-joints on both sides.

Posted on Mar 19, 2009

  • 12104 Answers

SOURCE: 1999 f250 super duty building pressure in degas

check ur oil if color of grayish chocolate milk and or white smoke from tailpipe pretty sure signs of blown head gasket

Posted on Oct 14, 2009

emissionwiz
  • 75744 Answers

SOURCE: The anti theft sensor on the steering colum needs

The sensor is part of the ignition key lock cylinder, so the part and labor will be around $200-$300 depends on your local labor rate, the dealer must do this repair because the new lock cylinder key code must be programmed into the VATS module.

Posted on Dec 10, 2009

  • 1 Answer

SOURCE: 1999 ford f250 super duty 4x4 will go into 4

hello

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I have to do to replace air bag/horn switch on a 2005 Ford F350 6.0L diesel?


Horn swith or clock spring ? Is air bag light lit on the instrument cluster ? You would have to take air bag module off the steering wheel .An to do that you have to deenergize the air bags , pull a fuse an disconnect the negative battery cable . Then you have to pull the steering wheel . Videos on youtube showing to replace clock spring ! Steering Column Airbag Clockspring Repair Ford Superduty 1999 Up

Nov 11, 2016 | Ford F-350 Cars & Trucks

1 Answer

At idle Engine accelerates when moving the steering wheel


That could be a tough one to diagnose ! I would start by pulling the steering wheel off an check wiring inside , see if lose connection or wire chaffed an touching metal ! Does it have buttons on the steering wheel , cruise control ? or on the stalk on the side of the column ? Is air bag light lit on the dash ? Short in the clock spring , Do you know what a clock spring is ? Ford Windstar Steering Wheel Clock Spring Replacement B1932

Sep 16, 2016 | 1999 Ford Windstar

1 Answer

2001 f250 airbag light came on horn won't work or cruise controls or automatic hubs won't lock. Is this all connected? It happened at the same time


The horn switch and the air bag and cruise control wiring in the steering wheel go through the clock spring, ford calls it air bag sliding contact. The clock springs have been know to go bad.

Steering Column Airbag Clockspring Repair Ford Superduty 1999 Up

Dec 26, 2014 | Cars & Trucks

1 Answer

How to replace a clock spring


Is air bag light on ? First test horn for power & with power.if there's power going to horn change horn if non when horn pushed chance clock spring ? Have any one done any steering repairs they might not of re-centered rack to colum .

Dec 23, 2013 | 2002 Kia Rio

1 Answer

Repair clock spring


Remove your battery, wait at least 30 min, then remove the air bag (bolted on from the back of the steering wheel), Then remove your steering wheel, remove upper steering colum cover and your clock springs should be visible..

Jun 21, 2013 | 2007 Nissan Tiida 1.6

1 Answer

How to install clock spring


Not recomended for untrained people as airbags can be very dangerous. That said you need to. 1) disconect battry 2) remove SRS (Airbag fuse) 3) remove shroud around steering colum 4) wait ten minutes. 5) remove horn pad (airbag houseing) usualy held in by tamper proof bits from back of steering wheel. 6) unplug wires to airbag & horn 7) undo steering wheel bolt & mark position of steering wheel to colum splines. 8) remove steering wheel with suitable puller (NOT a hammer) 9) unclip clock spring & replace 10) reverse procedure

Sep 22, 2012 | Cars & Trucks

1 Answer

Horn stay on until fuse blown. is it the relay


sounds like you have a short in the clock spring assembly behind the steering wheel, remove the plastic cover from the steering colum and unplug the connector for the horn reinstall fuse and make sure it dosent blow while horn is unplugged, replace clockspring if fault is gone

Jul 31, 2011 | 1999 Buick LeSabre

1 Answer

My Air Bag light came on as well as my power steering light are on. How do i fix this what dose it mean?


POWER STEERING IS LOW ,AND THERE,S A CLOCK SPRING IN THE STEERING COLUM WHERE THE CLOCK SPRING GOES

Mar 13, 2011 | 2004 Saturn ION

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...