Question about Volkswagen Cars & Trucks

Open Question

Vw caddy club 1998 firing order needed

Firing order 8v

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 397 Answers

SOURCE: what is the firing order

What you need to do is...

1, Find TDC (top dead centre) for cylinder number 1. Easiest way to do this is to get the car on level ground, put it in 5th gear, handbrake off and pull / rock the car forwards. You are looking to line up the timing dot on the crank pulley to the notch on the cover. At the same time observe which direction the rotor arm turns as well i.e. clock or anti-clock wise.

2, Once you have found TDC, look to where the rotor arm is pointing and that will be towards plug number ones lead position.

3, Now assuming the firing order is 1-3-4-2 and #1 cylinder is at the opposite end to the gearbox, you should be able to work out what goes where.

4, Look at the rotor arm position as you have set up the timing, fit the cap then fit the lead to #1 cylinder. Fit the other leads as above.

Posted on Aug 10, 2008

  • 1757 Answers

SOURCE: diagram for a 1998 VW

For the 1998 VW Jetta:
I do not know if you have the 2.0L SOHC In-Line 4-Cylinder or the 2.8L DOHC V-6; however I have included both below. The 2.0L has a ture Distributor Cap and the 2.8L has an Ignition Coil.

For the 2.0L SOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders
........(back).........
|...1...2...3...4...|
.......(front)
Distributor:
..(back)
(+)..1
2..........3
......4....(+)-screw

For the 2.8L DOHC V-6:
Firing Order:
1-5-3-6-2-4
Cylinders:
.......(back).......
|.1....3....5....|
|....2....4....6.|
Ignition Coil Connections
(back)
|.2..5.|
|.4..3.|
|.6..1.|
(front)

Let me know if this helped, or if you have additional information of questions. Feel Free to contact me at FixYa.com!



Posted on May 04, 2010

  • 1757 Answers

SOURCE: need the firing order for a 1998 dodge ram 1500

For the 1998 Dodge Ram 1500 5.2L V8:
It is the same for the 2WD and 4WD

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
..........(back)
_____..........._____
|...8...|..........|...7...|
|...6...|..........|...5...|
|...4...|..........|...3...|
|...2...|..........|...1...|
..........(front)

Distributor:
........(back)
............3
....4..............6...
.......................(+)-screw: rounded-end of Cap
8......................5
(+)-screw: square end of Cap
.....1...............7
..............2
.........(front)

Rotation: Clockwise

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Posted on May 18, 2010

  • 1757 Answers

SOURCE: need firing order for 1998 Jeep Cherokee gand

For the 1998 Jeep Grand Cherokee Laredo:
I do not know if you have the 4.0L In-Line 6-Cylinder, the 5.2L V8, or the 5.9L V8; however I have included ALL below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: AND 5.9L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.......3
..4.........6

8.............5
..1.........7
.......2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on May 28, 2010

  • 1757 Answers

SOURCE: firing order diagram for 94 vw gold

For the 1994 VW Golf:
I do not know if you have the 1.8L SOHC In-Line 4-Cylinder or the 2.0L SOHC In-Line 4-Cylinder; however I have included both below:

For the 1.8L SOHC In-Line 4-Cylinder
Firing Order:
1-3-4-2
Cylinders:
..........(back).........
|...1....2....3....4...|
..........(front)
Distributor:
...(back)
(+)....1
...2.........3
........4...(+)-screw

For the 2.0L SOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
..........(back)..........
|...1....2....3....4...|
.........(front)
Distributor:
......(back)
.....2.......1
(+)............(+)-screws
.....4.......3
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on May 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vw caddy pr 1gs firing order


1,3,4,2 No 1 is first on the left.

May 02, 2015 | Cars & Trucks

1 Answer

Firing order diagrams


please go to this site , and it should tell you the firing order. .teufert.net/caddy/caddy.pdf, and when page comes up. click on 4th link down. Good-Day! 1-8-7-2-6-5-4-3,

Jul 03, 2014 | 1967 Cadillac DeVille

1 Answer

Distributor firing order


wow no year. 1996 or 2004?
G16a or G16B engine?
1,3,4,2

but the 8v dizzy spins backwards for 16valve.
so.
the 16v is here
see drawing 1.
if not 16v see here
http://www.fixkick.com/IGN_timing/16v-procedure.html


8v is Cw rotation
http://www.fixkick.com/IGN_timing/8v-procedure.html

cylinder #1 is for.
F1,2,3,R4.
a noob answer that.
or all years
http://www.fixkick.com/IGN_timing/index.html


Apr 17, 2014 | Geo Tracker Cars & Trucks

2 Answers

I have a 1998 VW jetta I'm trying to change the spark plugs. I know the wiring order and the firing order. I just don't know how to tell if the engine is in the right position to be lined up with the...


If your trying to change spark plugs remove one wire from a plug, replace that plug, reinstall the wire onto that plug and move on to the next plug. You don;t need to worry about firing order unless you plan on changing the wires or the cap and rotor. Even if you where to change the wires if you did them one at a time than the new ones would be in the exact same place as the old ones and there is nothing to worry about,

Jan 18, 2011 | 1998 Volkswagen Jetta

1 Answer

Had problems with vw caddy van starting when warm,...


2004 vw 2000sdi caddy van wont start some mornings you need to wind it over before it fires, immediately after it fires you can switch off ignition and it will start first time and continue to start all day. vw dealer says no fault codes present. gloplugs renewed, new battery,fuel problem? Has anyone come accross similar problem I

May 20, 2010 | Cars & Trucks

1 Answer

Diagram for a 1998 VW Jetta distributor cap firing order


For the 1998 VW Jetta:
I do not know if you have the 2.0L SOHC In-Line 4-Cylinder or the 2.8L DOHC V-6; however I have included both below. The 2.0L has a ture Distributor Cap and the 2.8L has an Ignition Coil.

For the 2.0L SOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders
........(back).........
|...1...2...3...4...|
.......(front)
Distributor:
..(back)
(+)..1
2..........3
......4....(+)-screw

For the 2.8L DOHC V-6:
Firing Order:
1-5-3-6-2-4
Cylinders:
.......(back).......
|.1....3....5....|
|....2....4....6.|
Ignition Coil Connections
(back)
|.2..5.|
|.4..3.|
|.6..1.|
(front)

Let me know if this helped, or if you have additional information of questions. Feel Free to contact me at FixYa.com!



May 04, 2010 | Volkswagen Jetta Cars & Trucks

1 Answer

1998 vw cabrio 2.0l need picture of wires on cap in order


For the 2.0L:
Firing Order:
1-3-4-2
Cylinders:
.........(back)
1.......2......3......4
.........(front)
Distributor:
.....(back)
(+)...1
2..........3
....4...(+)-screw

Sep 14, 2009 | 1998 Volkswagen Cabrio

1 Answer

Gearbox


This job can get involved, so i would suggest you join up with a VW club online of which there are many to choose from.
Such as: http://www.the-bug-club.com/
At this link you can get all the help you need from real VW nut's

Jan 29, 2009 | 1998 Volkswagen Beetle

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...