Question about 2007 Toyota RAV4

1 Answer

I got a rav4 2007 and its blown the fuse of the power windows i replace it 4 times and the fuse i change is of the same type 30 AMP did i have to change with other of more AMP?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 36,467 Answers

The 30A PWR fuse connects power directly to the driver's side power window switch a short in the switch or any of the power window regulator motor circuits could cause the PWR fuse to keep blowing

Posted on Nov 08, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 104 Answers

SOURCE: the audio/clock fuse blew and every time I replace the 15w fuse it blows

i would try to unplug the clock and the radio change the fuse and see if the fuse blows.

Posted on Apr 30, 2009

  • 1 Answer

SOURCE: 95 Toyota Camry power window fuse keeps blowing

the window switch is stuck even if you work it with your finger and it doenst feel stuck the brass contactes are welded together on the in side of the switch try a new switch or take the one you have apart ... becarefull thu lots of springs and some sall parts inside

Posted on May 16, 2009

mkv0525
  • 358 Answers

SOURCE: 140 amp fuse blown request replacement instructions

you have to remove or access the bottom half of under hood fuse panel to remove bolts on teh bottom of that fuse.

Posted on May 20, 2009

lowbricks
  • 7 Answers

SOURCE: KEEPS BURNING FUSE FOR POWER WINDOWS/LOCKS ITS PINK SQUARE 30 AMP

check ur trunk where there is a cap thing back there where wires run to make sure that didnt burn i have 1998 camry that did the same as urs and i checked mine and i fixed mine and now everythings works now

Posted on May 27, 2009

  • 1244 Answers

SOURCE: EFI 15 amp fuse keeps blowing, any suggestions?

you either got a shorted wire to the injectors or a injector stuck! or shorted

Posted on Jan 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to find fuse boxs


FUSE PANEL LOCATION
The fuse panel is located in the engine compartment. A label on the inside of the cover lists the fuse amperage and circuits protected.
volvo 850 fuses fuse panel layout service repair manual
FUSE PANEL IDENTIFICATION
Fig. 1: Fuse Panel Identification
Courtesy of Volvo Cars of North America.
WARNING: Always disconnect battery ground cable before servicing "high-current fuses. It is recommended that "high-current" fuses be replaced by a qualified technician.
* 1 - 15 Amp
Fuel Injection, Distributor Ignition, Automatic Gearbox
* 2 - 15 Amp
Fuel Pump, Alarm System
* 3 - 10 Amp
Courtesy Lights, Oil Level Sensor
* 4 - Not Used (1993-95)
* 4 - 10 Amp (1996)
Electronic Start Inhibitor (Immobilizer)
* 5 - 30 Amp
ECC Blower (Speed 4)
* 6 - 25 Amp
Central Locking System, Alarm
* 7 - 15 Amp
Audio System (Amplifier)
* 8 - 25 Amp (1993-95)
Power Antenna, Trailer Connector
* 8 - 40 Amp (1996)
Electronic Start Inhibitor (Immobilizer)
* 9 - 30 Amp
ABS, Traction Control System
* 10 - Not Used (1993-95)
* 10 - 15 Amp (1996)
Heated Rear Seat (If Equipped)
* 11 - 30 Amp
Heated Rear Window & Side Mirrors
* 12 - 10 Amp
Brake Lights
* 13 - 15 Amp
Hazard Flashers, Headlight Flashers, Alarm
* 14 - 30 Amp
ABS, Traction Control System
* 15 - 10 Amp (1993-95)
Audio System, Courtesy Lights, Door Open Light, Trunk Light, Glove Box Light, Remote Control Central Locking System,
Oil Level Sensor, Seat Belt Reminder
* 15 - 10 Amp (1996)
Audio System, Courtesy Lights, Door Open Light, Trunk Light, Glove Box Light, Remote Control Central Locking System,
Oil Level Sensor, Seat Belt Reminder, Data Link Connector
* 16 - 30 Amp (1993-95) Accessories
* 16 - 30 Amp (1996)
Power Antenna, Trailer Connector, Accessories
* 17 - 10 Amp
Key Reminder
* 18 - 25 Amp (1993-95)
Heated Front Seats, Power Mirrors
* 18 - 15 Amp (1996) Front Fog Lamps
* 19 - 15 Amp
Left High Beam Headlight
* 20 - 15 Amp
Right High Beam Headlight, High Beam Indicator
* 21 - 15 Amp
Left Low Beam Headlight
* 22 - 15 Amp
Right Low Beam Headlight
* 23 - 10 Amp
Left Parking Light, License Light
* 24 - 10 Amp
Right Parking Light, Bulb Failure Warning Sensor
* 25 - 10 Amp
Rear Fog Lamps, Fog Lamp Indicator
* 26 - Not Used (1993-95)
* 26 - 25 Amp (1996)
Heated Front Seats, Power Mirrors
* 27 - 15 Amp
Back-Up Lights, Turn Signals
* 28 - 10 Amp
Cruise Control, Heated Rear Window, Seat Belt Reminder Light, Shiftlock, Bulb Failure Warning Sensor, Heated Rear Seat
* 29 - 15 Amp
ABS, Traction Control System
* 30 - 10 Amp
Cigarette Lighter
* 31 - 25 Amp
ECC, ECC Blower (Speeds 1-3)
* 32 - 10 Amp
Audio System, Remote Controlled Central Locking System
* 33 - 15 Amp (1993-95)
Power Seats, OBD Test Socket, Tailgate Washer/Wipe (Wagon)
* 33 - 15 Amp (1996)
Power Seats, Tailgate Washer/Wipe (Wagon)
* 34 - 25 Amp
Windshield Wiper/Washer, Horn, Headlight Washer/Wiper
* 35 - 10 Amp
Instrument Lights, Sun Roof, Traction Control System
* 36 - Not Used
* 37 - Circuit Breaker
Power Windows, Power Sun Roof
* 38 - Not Used
* 39 - Circuit Breaker
Drivers Power Seat
* 40 - Circuit Breaker
Passengers Power Seat
RELAY PANEL LOCATION
The relay panel is located at the left corner of the instrument panel.
i copied this off a volvo site Hope this helps

Oct 10, 2016 | Volvo 850 Cars & Trucks

2 Answers

Door locks, power seat and trunk and gas lock stopped working at same time


Hi there.
Well you should have a blown fuse and it should be either a 30 amp or a 20 amp fuse which should be with the fuse cluster.
The 20 amp one comes into the ign unit so it is most likely the 30 amp.

Apr 10, 2015 | 2002 Ford Crown Victoria

2 Answers

How do i replace a fuse


Found out want size and amp, either pull it or if held in by screw , unscrew it.

Feb 02, 2015 | Cars & Trucks

1 Answer

No power at fuse for power windows


Sounds like a wire that is not connected properly. Rechk all connections including inside the cab. Chk if u can find where down the line u get power then work from there. Chk if u can get power by earthing the power at the fuse insert. Using a meter rechk all yr wiring to the windows as this will show u where the power is lost. cheers

Aug 13, 2012 | Mazda Tribute Cars & Trucks

1 Answer

My 2003 elantra all 4 windows stopped working. checked 30 amp fuse in dash.. was good. checked relays box with fuses in it under hood. Didnt see anything blown. What else could cause all 4 windows to stop...


Wiggle the wires going into the door from the pillar where the door hinges are while trying to put the window up or down if nothing happens then change the master switch.

Feb 28, 2011 | Hyundai Motor 2003 Elantra

2 Answers

The 30 amp fuse what does it control


30 AMP FUSE COULD CONTROL IGNITION SWITCH ACC SYSTEM, CONTROLS POWER WINDOWS 30 AMP FUSE CONTROL MAIN HEAD LIGHT SWITCH.LOOK ON FUSE COVER DIAGRAM FOR 30 AMP FUSE CONTROL CIRCUITS AND ALSO LOOK IN THE OWNER FACTORY MANUAL FOR 30 AMP FUSE CONTROL CIRCUITS.

Dec 10, 2010 | Ford F-150 Cars & Trucks

3 Answers

Brake lights not working even though the brake peddle is pushed down The switch still goes in and out. Fuse box has some fuses missing. The fuse box does not have a desription on every plug of what it is...


Here are the numbers on your fuseblock and fuses coresponding to the number that is on your fuse block.
1-20 amp (yellow)
Hazard flasher
2-10 amp (red)
back up lights, A/C clutch cycling Switch
3-30 amp (green)
Power windows
4-30 amp (yellow)
A/C or heater blower motor
5-20 amp (yellow)
Panel Lights, Side marker lights, Park, Taillights, Clock & radio display Intensity, License & panel lights.
#6-10 amp (red)
Stoplight, buzzers, Anti-lock brake module
#7-15 amp (lt. Blue)
Tachometer, horn & Relay
#8-8 amp (yellow)
Power Door locks
#9-10 amp (red)
Radio
#10-10 amp (red)
Rear Wheel Anti-lock module, Turn Signals
#11-20 amp (Yellow)
Windshield wiper & washers
#12-15 amp ( LT. Blue)
Cigarette Lighter
#13-5 amp (tan)
Speed Control, warning buzzers, gauges, indicator lights
#14-5 amp (tan)
Time/delay relay & under-hood light, dome light, power mirrors, readio & clock Memory, Interior lights, reading lights
#15-blank
Not used
#16-4 amp (pink)
Radio Lights & overdrive switch light 1989-91, Cluster lights, Cigarette Lighter light & as tray light, Cluster lights, A/C & heater controls.
#17-relay
Hazard Flasher warning
#18-relay
Relay
#19-Circuit breaker
#20-relay
Turn signal Flasher
#21-buzzer
Warning
#22-Relay
Horn

Aug 04, 2009 | 1991 Dodge Dakota

1 Answer

Power window blows fuse


Problem fixed as follows:
Purchase a package of five 30 amp ALC type fuses. Replace blown fuse #8 (30 amp). Perform the following test to determine if the problem is isolated to the driver-side front window.
-One at a time, (i.e. only push one window switch button at a time) operate each of the other three windows (passenger side and rear driver side), to determine if the problem is occuring only on the driver side window. If any of them blows the fuse, replace it with a spare and proceed to test the next window. Repeat for each of the three windows. The process described below may also resolve the issue on the other windows if any of them blew the fuse during this test.
-Now, operate the switch for the driver side window. It is expected to work for a brief period (<1sec), but may very quickly blow fuse #8. Replace fuse #8 with one of the new 30 amp ALC fuses.
Remove the door panel, by sliding the speaker forward and removing the three white clips on the bottom of the panel. Also, pry out the screw clip in the panel well, just to the rear of the switch assembly, and remove the plastic bracket that holds in the switch assembly. The panel can now be lifted off.
To access the window mechanism, remove the tape over the oval cutouts near the top. Also, temporarily pull back the white plastic cover over the bottom of the door. Disconnect the white electrical connector near the center of the door (has only a red and black wire for the regulator motor). Using a small battery (motorcycle battery) and jumper leads test the mechanism's operation by connecting the battery directly to the motor wires. Use insulated test clips on the male connector and be careful not to short the clips together. The window mechanism should operate, and by interchanging the jumper wires (reversing battery power polarity), you can make the window go both up and down. Only do this for brief periods of time, as the motor circuit is now uprotected, i.e. there is no fuse in this test circuit. If the movement of the glass seems strained over part of the travel path, apply WD-40 lubricant to the metal rotating pivot point. Also apply silicone spray to the rail guides for the sides of the glass (with the window in the up position) and to the metal horizontal tracks and plastic wheels near the top of the mechanism. Also, spray some silicone lubricant along the bottom of the window on the outside, just above the rubber stripping, and operate the window a couple of times. An up and down test should now result in very smooth and even window movement. Reconnect the motor power wire to its mating connector, replace the tape and white plastic cover, and then replace the door panel. The mechanism should work smoothly, and the fuse should not blow. Total cost: $3.03 for fuses and a little WD-40 and silicone spray which you probably keep on hand.

May 17, 2009 | 1994 Volvo 940

2 Answers

Windows dont work and i dont know what fuse is blown


check them all is the easiest way hope this helps regards Jim

Apr 21, 2009 | 1996 Toyota Corolla

1 Answer

Toyota Camry power windows not working from master switch


Their are two fuses that power this system. One is a 15 amp gauge fuse and the other one is a 30 amp main power fuse. You can also check the power main relay, your ignition switch, or i could possibly be a fault in the wiring

Mar 11, 2009 | 1996 Toyota Camry

Not finding what you are looking for?
2007 Toyota RAV4 Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...