Question about 1994 Chevrolet S-10

1 Answer

4 wheel drive dont work

I Have a 1994 chevy s10 4x4 and the 4 wheel drive doesnt work. I have put a new push button on the inside of the cab. The push button lights up sometimes but the 4 wheel still doesnt work.

Posted by on

  • Anonymous Mar 13, 2014

    I unplugged actuator and it still blows fuse

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

Try changing the vacum switch on the trafer case

Posted on Jan 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Chevy K2500 6.6L Push button 4 wheel drive. All lights on buttons are lit up. Service 4 wheel drive is on dash. What would I need to check?


check receiver at transfer case connection get nasty clean contacts
also check to make sure transfer case is working as designed/also check for ground

Dec 19, 2013 | Cars & Trucks

2 Answers

2004 chevy silverado 1500 4 wheel drive wont work..


try selecting from nutreul or less then 3km

Feb 02, 2010 | 2003 GMC Sierra

1 Answer

I have a 2004 chevy silverado and the 4 wheel


the most likely cause is the front axle shift motor if bad your your front axle shaft will not lock in.if there is no shifting of transfer case there is also a electric motor that engages that in .

Oct 17, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Going from 4wd tranny to 2wd tranny


If you're going to change out your 4 wheel drive for 2 wheel drive, you will need to remove your transfer case, front drive shafts, and transmission. You will need a new drive shaft, and crossmember as well. Junk yard would be your best bet for the parts, but it doesn't make sense to eliminate your 4 wheel drive. It would be more beneficial to replace your transmission with a used one, or have your existing one rebuilt.

May 31, 2009 | 1994 Dodge Dakota Club Cab

1 Answer

Four wheel drive won't engage


Try to rock it by putting it into D an R it works for my truck.

Feb 18, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

Four wheel drive in cold


It is due to the cold weather,The fluid is to thick when cold for the actuator to engage the 4wd.

Please rate this solution.

Jan 16, 2009 | 2007 Chevrolet Colorado (Extended Cab) New...

1 Answer

NO POWER TO FOUR WHEEL DRIVE


it could be a fuse or a relay not conducting the power to the switch have a local tech test it with a voltometer. it should be free to diagnos.

Jan 06, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

1994 chevy s10 blazer 4x4 push button type


small sylinoid on the top of the transfer case needs replaced. easy to do. it has three vacumelines going to it just trun out and replace like a bolt.

Dec 10, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

93 ford explorer xlt


First check your 4 wheel drive switch to make sure it works, for on an off settings. (Use a volt-ohm meter for this. On should show continuity in the readings (if digital then it should show zeros in the dial) Off should show no continuity or 1.0 in the dial.

1. Check your fuses.
2, IF OK, then check your FUSE LINKS.
3. IF OK, then check your 4 Wheel Drive relay in the fuse box.
4. IF OK, then check continuity of the wires harness to the 4 wheel drive switch for DC voltage.

Jul 26, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1994 Chevrolet S-10 Logo

547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...