Question about 2009 Saab 9-7X

1 Answer

High beams work but low beams don't. I replaced bulbs to no avail. are they on seperate fuses??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 689 Answers

Defective headlight relay, Or loose wires going to head lights,

Posted on Nov 06, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High beams work for both lights, 1 low beam does not


Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?

May 31, 2015 | 2006 Mazda Tribute

1 Answer

2004 mazda 6 low beams don't work but high beams do


its probably the switch inside on the steering column check fuses first

Mar 20, 2013 | Cars & Trucks

1 Answer

The headlights do not come on but the high beams do this keeps happening and they say it blew a fuse do high beams and low beams run off a different fuse and would'nt a dead short be causeing this


Forget the dealer,they obviously don't care to help you

They say it is a fuse,why don't they resolve the issue

Go to a competent repair shop

Oct 27, 2012 | 2002 Ford Focus

1 Answer

Is there any fuses or relays that are not in the fuse box on a 2002 buick rendezvousfor the bright lights


The high and low beam lights use the same power source, so if the low beams work the high beams have power.
There is a low and high beam relay controlled by the dimmer switch.
If the low beams work and the high beams don't, and the bulbs are good, check the dimmer switch and the high beam relay.

Aug 04, 2012 | Buick Rendezvous Cars & Trucks

1 Answer

2005 monte carlo drl won't tun on and i have no Low beams too. High beams, turning signals and hazards works. I replaced the bulbs, still drl and low bemas don't work. Checked all fuses and th


CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

Jul 30, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

Bright lights work low beams don't2005 excursion


ck for power to bulbs ck fuses ck switch

Jul 29, 2012 | 2005 Ford Excursion 4x4

1 Answer

The low-beam headlights don't work. The fuses are fine as I replaced them with those of the high-beams and the high-beams worked. Other than both bulbs burning out at the same time what else could be...


Possibly the bulbs. Take a look at them; they have 2 coils per bulb, one for the low beam and one for the high beam. So it is possible that the more used low beam burns out before the lesser used high beam.

Aug 19, 2011 | 2000 Chrysler 300M

1 Answer

My headlights don't work, but the brights do. What caused this and how can I fix it?


Every headlamp has a bulb inside that has two filaments one for high beam and the other one for low beam, if any of those filament is cut then that beam (High or low) won't work. If your high beam work then your fuse it's ok, so you can visually inspect your headlights bulbs for broken filaments. remove bulb socket and remove the bulb carefully to inspect the filaments. if the filaments are atacched from one terminal to the other then the bulb it's ok, if not replace the bulb.

Jun 28, 2011 | 2002 Chevrolet Suburban

1 Answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?


Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block

Dec 16, 2009 | 2004 Hyundai Santa Fe

1 Answer

2006 ford freestar high beams


there should be seperate fuses for the high beams in the under hood fuse box try checking them

Nov 05, 2008 | 2006 Ford Freestar

Not finding what you are looking for?
2009 Saab 9-7X Logo

713 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...