Question about 2000 Nissan Maxima
My car guages was working fine last night and when I got up to go to work this morning none of my needles work anymore nor my car mileage appears. Its all the needles on the dash that are not working.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .
Posted on Jan 04, 2009
SOURCE: 1996 Nissan 240SX
Had very similar problem. If your ignition fuse under the hood is blown, (30 amp fuse), then here's something to check. It was my problem and I fixed it and have had no troubles since. Ok, stand in front of car with hood up. Looking at the engine, just to the left of the front left corner (corner of engine closest to the fuse box) there is a wire harness that rubs against this corner of the engine block. Mine had rubbed through the plastic housing of that harness, through two wire insulations (both wires were black with red spots or something like that but there were alot of wires in the bundle--had to look at all of them to confirm no others were worn through) of the two wires that go to the ignition system and waa laa shorted straight to the engine block which is ground. I picked up on this tip that wires get worn thru at this spot via the internet. Anyway, using electrical tape and such and using tie wraps to pull the harness up away from the engine block, this fixed the problem. It took awhile even after the internet tip cuz it is just that way working on cars. I had blown several fuses befor getting a 'resettable' 30 amp fuse and hooking it up....I thought the problem was in the ignition switch in the steering column...it wasn't...All that to say, I tried a lot of things before finding the tip on the internet of where the short could be. I took pics and such. If you'd like me to post pics let me know.
Posted on Jan 11, 2009
SOURCE: ABS light stays on
that has four wheel anti lock so your gonna need to either take all them off and clean ends it may correct the problem but more than likely your gonna have to take to a large shop that has abs computer to find which sensor is bad then correct the problem
Posted on May 24, 2009
this should be known issue at your nissan dealership, was a recall in most countries to replace all 4 door lock actuators. if the vehicle is out of warranty this may not apply.
The acuators are a sealed design and cannot be repaired, can only be replaced with new ones,
Posted on Jul 01, 2009
Tips for a great answer:
Sep 19, 2013 | 2001 Nissan Maxima
Nov 16, 2017 | 2009 Nissan Maxima SV
Sep 05, 2012 | 1999 Nissan Maxima
Jun 20, 2011 | 1995 Nissan Maxima
Mar 07, 2011 | 1991 Nissan Maxima
Jan 14, 2011 | 1995 Nissan Pickup
Oct 19, 2009 | 2000 Nissan Maxima
Jun 23, 2009 | Nissan Maxima Cars & Trucks
Mar 15, 2009 | 2004 Nissan Maxima
82 people viewed this question
Usually answered in minutes!