Question about 1988 Chevrolet S-10

1 Answer

V8 s10 help

Does anyone know what all u have to change out when you put a 305 in a 1988 4x4 s10. i heard u could use stock chevy 1500 parts.

Posted by on

  • caseywoolley Jan 05, 2009

    i know the 350 are the same size but everyone does them i wanna be different. and i found a good 305 for free i just have to go get it out. its a carb motor. the wiring harness are the same.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

You can get the engine and accessories, if its fuel injection you need the computer and possibly a wiring harness, if you get a 2wd engine you may have to switch the oil pan for a 4wd(shaped for the front drive components)

you may also be able to get the 5.7l(350cid) as they are just about the same size

Posted on Jan 05, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can i put a 5.7 tbi v8 into a 99 chevie s10

it'll take some wrenchin. and a bit of fabricating... BUT it is possible!

Jun 23, 2012 | Chevrolet S10 Cars & Trucks

1 Answer

Will a computer off of a 1992 chevy 1500 with a 305 work on a 1992 chevy s10 with a 4.3l

No it will not. One is for 8 cylinders and the other has 6 cylinders.

Apr 23, 2012 | Cars & Trucks

2 Answers

I have a 1986 Chevy S10 4X4, Auto.Transmission, Reverse & 1st gear are fine, but will not come outta 1st gear. What can I do? Thanks for any help!

Normal 0 To take off and put back the transmission cost around $700 labor. To open up, repair and put things together, parts and labor start at $800. So the total would be at least $1500.
Buying a used Transmission for $300, and replace the bed one for $700, would cost you $1000 at least.
The question is:
Could you find a dissent transmission of a 1986 Chevy S10 4X4.
The answer is:
Chanced are slim or none.

Aug 14, 2010 | 1986 Chevrolet Chevy

1 Answer

Trying to replace headlamps in 1994 Chevy 1500 (5.7L V8 4x4). No clue how to get in there. Any ideas?

I don't know your chevy specifically but there are only two ways. Either in the engine compartment or a couple of screws on the outside hold the lens. Remove and you can change bulbs. You can always call your Chevy dealer and ask service advisor. They should be willing to help you otherwise you may buy a Ford. Good luck!

Mar 10, 2010 | 1994 Chevrolet C1500

1 Answer

Unlock my chevy delco radio

shouldnt have to pay notify a chevy dealer in person for code most dealers wont deal with a code problem over phone they dont charge for the code due to the fact that a dead battery can also lock out the radio system into the anti-theft mode

Dec 06, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1995 Chevy Tahoe 5.7L V8: thermostat temperature/running temp?

Depends on what thermostat you put in. Stock is a 190*. Which will usally run about 200-210. That's where most all small blocks are happy.

Nov 09, 2009 | 1995 Chevrolet Tahoe

1 Answer

I have a 2002 chevy s10 extreme bouth it in 2002

Go to faxonautoliterature and put your truck in on the home page. When your truck page comes up, scroll down to the bottom. They have a manual there on swapping motors. From experience it should give you part numbers, modifications needed and pictures, everything you'll need to know to do your job. It cost's $24.95. Hope this helps.

Sep 15, 2009 | 2002 Chevrolet S-10

1 Answer

I want to switch transmissions

If they are both 4L60Es' then yes. I know the 96 1500 does but you didn't state what size the 97 is. And are they both 4X4?

May 03, 2009 | 1997 GMC Sierra

1 Answer

Engine Swap

you will need a new bell housing and i would change the radiator

Apr 13, 2009 | 2001 GMC Sonoma Extended Cab

5 Answers

Transmission issue, when in reverse heard a clunk, then a whining sound....later there was no reverse...2001 chevy blazer

ok my truck done the same thing put it in reverse then to drive to check my universal joint and heard a pop and then i lost 2nd, 4th, and reverse all at one time it ended up being the sun-shell gear in the tranny cost me almost 500 to fix hope this helps out

Dec 20, 2008 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77939 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides