Question about 2001 Hyundai Accent

1 Answer

Can crank but no start

Spark on spark plug

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 156 Answers

Ck. 4 fuel & spark then go from there

Posted on Nov 06, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ba 203 won't start imobilelizer has come on can't get it off how had ute 1week ford say have to to tow to them and $140.0 to go on computer is there cheaper easy way please. tony f# fords


Hi Anthony......,It's either electrical OR fuel so If you're a hands on guy then do this.... Pull a spark plug lead off a spark plug OR if it's a "COIL ON A SPARK PLUG" pull that off and put a spare spark plug into that spark plug lead OR coil, Then earth that spark plug to a clean part of the motor(make sure the spark plug is touching steel)Turn motor with the key and see if the spark plug sparks.... If it sparks then you have a fuel problem....... But if no spark then you have an electrical problem.... The links below are YouTube videos showing how to fix a car that doesn't start/cranks but doesn't start, Also there's videos down the right side of the links that may help as well...................
Fixing Car That Does Nothing When You Turn The Key

Fixing Car That Cranks But Doesn Start Up

Car Cranks But Will Not Start


May 04, 2016 | Ford Cars & Trucks

1 Answer

Why doesn't it crank?


What make vehicle , model an year also . Is it getting fuel ? Spray some carburetor cleaner in the throttle plate if it then starts you have a fuel delivery problem not spark ! Pull a plug wire off spark plug an have someone crank engine ( turn key to start ) while you hold end of the plug wire near ground to see if there is spark etc..Go to youtube an check out a few cranks but doesn't start trouble shooting videos .

Jan 25, 2016 | Cars & Trucks

1 Answer

Cranks won't start


First you must check to see if engine is mechanical sound by performing a compression test. remove the spark plugs install a compression gauge in the spark plug hole and crank engine about 4 cycles compare readings to all cylinders reading should be around 125-150 psi readings in the 50 psi range possible jumped or broken timing belt. If engine is mechanically sound test for spark at the spark plugs use a spark plug laid against valve cover and have some one crank it over look for the spark to jump the gap. A no spark problem is internal in the distributor.

Nov 07, 2013 | 1995 Honda Accord

3 Answers

Cranks but doesnt start


I am a self emplyed mechanic, if a motor cranks but does not start, that is not a starter, you need to see if you have gas or spark . is there a buzzing in the gas tank when you turn the key. if so then you have gas. now you needto see if you have spark. need 2 people to do this . pull a spark plug wire and stick a screw drive in the boot and crank the motor please stand back,and look for spark. if you have spark. then you need a crank position sensor thank you ted

Sep 08, 2012 | 2004 Dodge Stratus

1 Answer

I have a mitsubishi colt, and it has problems starting in the mornings. It turns over, but wont start, when I eventually get it started its very lumpy, and when I push the accellerator the engine almost...


There is no simple answer, there are to many variables. If you have access to a scan tool, pulling the codes should help. Without them its back to old school hunt and peck method. At this point we need to narrow down the problem. You need to test for spark.
  1. Tag and disconnect the spark plug wires from the spark plugs.
  2. Remove the spark plugs and install the spark plug wires to each spark plug.
  3. Ground (do not hold spark plug) the spark plug; check if spark occurs while engine is being cranked.
Crank the engine for no more than 2 seconds at a time to prevent flooding the engine with gasoline.
If you have spark, You will want to make sure you have fuel injector pulse, along with fuel pressure. If you have spark ..simply spray some starting fluid in through the air filter and hold the gas pedal to the floor and crank it over while spraying. If it fires up, you know it is fuel related( fuel pump, regulator, or ECM if no injector pulse) . If you have no spark then look at ignition coil connection and trace through to the distributor( if equipped ). The crank shaft sensor has a tendency to fail on these as well. This should give you a few things to test and check to start you on your way to narrowing it down. If you have no spark then look at ignition coil connection for power and trace through to the distributor( if equipped ). If it is DIS( no distributor). It may be the Crank sensor or the ECU. The crank shaft sensor has a tendency to fail on these as well.
The ECU uses the signal sent from the Crank sensor to trigger the spark and fuel injectors. ( make certain you have checked all fuses)

Apr 06, 2011 | 2006 Mitsubishi Colt

1 Answer

Crank, won't start problem. I checked the spark plugs on Jeep 98. Looks good. Could it be the crank sensor or starter coil?


Yes it is very much possible.But there are many other possibilities too,including starter and spark plugs issue.

If your engine cranks normally but will not start because it has no spark, or it stalls and won't restart because it has no spark.

You can also do a test to confirm the problem .The procedure to do the test is as follows:---

If your engine has spark plug wires, disconnect one of the plug wires from a spark plug and place the end of the wire near a metal surface on the engine. Then insert a small Phillips screwdriver into the end of the wire (the plug boot), or a small bolt or nail to provide a conductive path. Then crank the engine and look for a spark to jump from the screwdriver, bolt or nail in the end of the plug wire to the engine. If you do not see a spark, there is an ignition problem.

OR-----------

If your engine has a coil-on-plug ignition system with no plug wires, In that case remove one of the coils from the spark plug and insert an old spark plug, a spark plug tester or a screwdriver into the end of the coil. Ground the spark plug or plug tester to the engine, then crank the engine and look for a spark. No spark indicates an ignition problem.If the engine has no spark, check for voltage at the coil positive terminal when the ignition key is on. If NO voltage, then problem is on the trigger side of the coil (pickup, crank sensor, ignition module or primary wiring circuit).

But If there is NO voltage at the coil itself, then in that case the problem is on the supply side (the ignition switch or ignition wiring circuit).-----------------

Jeep cranks but no start:----------------

A jeep that cranks over but doesn't start, in many cases will be due to a bad fuel pump, a broken timing belt, an inoperative cam sensor or crank sensor. Also these problems are related to faulty spark plug. Check the spark at spark plugs when you start the jeep. Do you notice any spark. Actually you should see. If in case there is no spark then it's a spark plug problem. Also the coil pack gives power to spark plug. So check the voltage at coil pack. It will show 12 volt. If there is no voltage noticed at coil pack then its faulty coil pack that has to be replaced. If all the possible options checked out ok then check the car starter. The starter gets power from battery to start the jeep. If the starter is faulty then it will not let the car to start. Also check and confirm that there is fuel in the jeep. If its very low fuel then in some cases this causes the problem. Also check and confirm that fuel pump is functioning properly and the fuel filter is not clogged. One of the easiest ways to check for a fuel pump related problem is to spray a little starting fluid into the air intake while trying to start the jeep. If the car starts momentarily, then there's a good chance the fuel pump is not working or the jeep is out of gas. You can also listen for the fuel pump's humming sound when the key is first turned on. Also if a inoperative fuel pump is suspected, a good technician will always check to verify there is power and ground being supplied to the pump, to eliminate the possibility of a bad relay or electrical issue. Fuel pressure can be checked with a pressure gauge and if there is pressure, pulse can be checked at the fuel injectors in several ways including the most common, with the use of noid lights. If the injectors don't have pulse the engine won't start. ---------- This troubleshooting tips will help you to solve the problem. Thanks. Helpmech.

Jan 07, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

The engine indicator on the dash wont stay lit before the start of the car, the engine turnsover but doesnt start


There is no simple answer, there are to many variables. If you have access to a scan tool, pulling the codes should help. Without them its back to old school hunt and peck method. At this point we need to narrow down the problem. You need to test for spark.
  1. Tag and disconnect the spark plug wires from the spark plugs.
  2. Remove the spark plugs and install the spark plug wires to each spark plug.
  3. Ground (do not hold spark plug) the spark plug; check if spark occurs while engine is being cranked.
Crank the engine for no more than 2 seconds at a time to prevent flooding the engine with gasoline.
If you have spark, You will want to make sure you have fuel injector pulse, along with fuel pressure. If you have spark ..simply spray some starting fluid in through the air filter and hold the gas pedal to the floor and crank it over while spraying. If it fires up, you know it is fuel related( fuel pump, regulator, or ECM if no injector pulse) . If you have no spark then look at ignition coil connection and trace through to the distributor( if equipped ). The crank shaft sensor has a tendency to fail on these as well. This should give you a few things to test and check to start you on your way to narrowing it down. If you have no spark then look at ignition coil connection for power and trace through to the distributor( if equipped ). If it is DIS( no distributor). It may be the Crank sensor or the ECU. The crank shaft sensor has a tendency to fail on these as well.
The ECU uses the signal sent from the Crank sensor to trigger the spark and fuel injectors. ( make certain you have checked all fuses)

Nov 14, 2010 | 2002 Mitsubishi Lancer

1 Answer

My 2003 OZ Rally Mitsubishi Lancer is not starting properly. The engine turns and turns but wont start. especially early in the morning when its colder. later in the day i will start it again and it will...


There is no simple answer, there are to many variables. If you have access to a scan tool, pulling the codes should help. Without them its back to old school hunt and peck method. At this point we need to narrow down the problem. You need to test for spark.
  1. Tag and disconnect the spark plug wires from the spark plugs.
  2. Remove the spark plugs and install the spark plug wires to each spark plug.
  3. Ground (do not hold spark plug) the spark plug; check if spark occurs while engine is being cranked.
Crank the engine for no more than 2 seconds at a time to prevent flooding the engine with gasoline.
If you have spark, You will want to make sure you have fuel injector pulse, along with fuel pressure. If you have spark ..simply spray some starting fluid in through the air filter and hold the gas pedal to the floor and crank it over while spraying. If it fires up, you know it is fuel related( fuel pump, regulator, or ECM if no injector pulse) . If you have no spark then look at ignition coil connection and trace through to the distributor( if equipped ). The crank shaft sensor has a tendency to fail on these as well. This should give you a few things to test and check to start you on your way to narrowing it down. If you have no spark then look at ignition coil connection for power and trace through to the distributor( if equipped ). If it is DIS( no distributor). It may be the Crank sensor or the ECU. The crank shaft sensor has a tendency to fail on these as well.
The ECU uses the signal sent from the Crank sensor to trigger the spark and fuel injectors. ( make certain you have checked all fuses)

Nov 02, 2010 | 2003 Mitsubishi Lancer

3 Answers

My 2000 Lesabre will crank but will not start


first thing check for spark
next check fuel pressure
finally, while cranking, watch the check engine light
It should be on before you start cranking, but what does it do while you are cranking?

Apr 18, 2010 | 2000 Buick LeSabre

2 Answers

98 dode ram wont crank no spark


May have no spark due to a bad crank sensor, which is responsible for spark when it gets a pulse through the cars' computer.

Apr 24, 2009 | Dodge Ram 1500 Cars & Trucks

Not finding what you are looking for?
2001 Hyundai Accent Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...