Question about 1994 Pontiac Firebird
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: low beam headlights are out
doggymom676: I would approach the problem from the simplest point and then inward. Believe it or not, it is not as uncommon as one might think, for both bulbs to be blown on just low or high beams on both sides. What I would suggest is trying another bulb on one side to see if it works before getting into expensive diagnostics which you may or may not be capable of doing.
The second thing I would look at would be the dimmer switch which is part of the turn signal switch. This can be checked with a test light. Coming off the switch low beam will be the yellow wire. It should be hot when switched to that position.
Hopefully this shold resolve your problem, if not, I'll see to it that I am able to follow through with some assistance.
Posted on May 02, 2009
SOURCE: I have a 1987 pontiac
In the engine comaprtment or under the dash panel or at the sides of the dash panel check fuses if its not the fuse do you hear the motor if not its the motor that makes it go up and down./ Please rate my response thank you very much
Posted on Feb 01, 2009
Ill buy it.=D i have a wrecked car but the engine and everything in it is perfectly fine. it will fit into your car and everything.
Posted on Oct 09, 2009
Tips for a great answer:
Jan 09, 2016 | Pontiac Firebird Cars & Trucks
Mar 18, 2014 | 1996 Pontiac Firebird
May 27, 2012 | 1994 Pontiac Firebird
Feb 07, 2012 | 1995 Pontiac Firebird
Mar 10, 2010 | 1995 Pontiac Firebird
Feb 16, 2010 | 1989 Pontiac Firebird
Oct 09, 2009 | 2002 Pontiac Firebird
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: