Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If two different mechanics, including a fiat dealer, already put their hands on your car, there is not much that I can say.
This kind of noise are often caused by bad rotor discs or locking up brake pads, I assume that this had been previously checked and fixed .
about the steering rack problem, when the steering rack has troubles the noise is from the steering rack itself and from the front of the car, if you are sure the noise is from wheel check brakes, or, if the noise does not cohincide with braking, check the wheel bearings.
See here on common brake noises, cause and identifying them.
about "fiat would not allow any more work on this problem", that sounds a bit like rubbish, call Fiat in your country (put Fiat in google, then find support/ contact), and ask them about their policies. I do not think from description this has got to do with steering, unless you get the noise only when steering, nyou usually get also vibrations on steering wheel in this case.
If this had been useful do not forget to rate the solution appropriately.
Posted on Sep 11, 2008
they are located at the back ov the engive they have lick black rubber pipes attached to them u have to pull them off then u will see the plugs thare will be 4 in a line u will need a spark plug socket set just turn them they will come out.
Posted on May 27, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Feb 04, 2014 | 2006 Fiat Grande Punto
Apr 14, 2012 | 2006 Fiat Grande Punto
Sep 13, 2011 | 2006 Fiat Strada
Aug 25, 2010 | Fiat X1/9 Cars & Trucks
Feb 28, 2010 | 2006 Fiat 124
Feb 19, 2010 | 2006 Fiat 124
Oct 08, 2009 | 2006 Fiat 124
Sep 02, 2009 | 2006 Fiat 124
86 people viewed this question
Usually answered in minutes!