Question about Cars & Trucks
Aircon switch does not switch on so I cannot tell whether the compressor will kick in or not. Radio plays for +- 30 minutes, beeps, then switches off. cigarette lighter socket has no power. All worked well and switched off without warning.
I would have gauges hooked up and see if the system has a charge in it, low charge will keep the compressor from running because the system oil is circulated with the refrigerant. If it low you have a leak and that must be addressed before recharging.
Posted on Nov 06, 2012
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
dude its normal for first start or cold start that the idle is ok but it must high than normal... its normal because the engine is warming up it self... when it gets warm, the idle speed will return normal idle... your engine is 1200cc, it has not much HP for a great load... and i know its a carburatored engine and its an old engine, your head lyt and a/c fan and aux fan and all the electrical system on your car, uses the HP of you engine and its a lot of load to the alternator driven by the engine to generate an electricity they need and thats why the engine rpm speed lowering down to dead and its shake. thats why when you use your lyts or all electrical, you engine is weakening... the best remede is adjusting you idle speed... its located behind the carburator.. its a small black knob.. just make a twist each eighter way and you'll find out if your idle rpm speed ts incresing or decresing.. just increase it and try opening your lyts and other electrical, if its still shaking then adjust it a little more
Posted on Sep 05, 2008
The Amber Engine Icon means the same as a Check Engine Light. Your car's ECM (Computer) has stored a Trouble Code, and you will need a OBD II Reader (On- Board Diagnostic) to get the code so you can diagnose what is wrong with your vehicle. You can go to any AutoZone and they can read the code for you at no charge. You will need to diagnose and fix the problem before the Check Engine Light will turn off.
Posted on Aug 13, 2010
Tips for a great answer:
May 10, 2017 | Cars & Trucks
Feb 12, 2016 | Cars & Trucks
Mar 05, 2014 | 2008 Renault Megane 1.9
Jan 27, 2013 | Cars & Trucks
Oct 30, 2012 | 1999 Volkswagen Golf
Mar 18, 2012 | 2005 Renault Megane Scenic
Jun 08, 2010 | 2000 Volkswagen Beetle
Mar 15, 2010 | Mitsubishi Pickup Cars & Trucks
Apr 10, 2009 | 2006 Renault Le Car
Nov 24, 2008 | 2003 Nissan Altima
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: