Question about 2003 Mercedes-Benz E-Class

1 Answer

Engine wont rev

Engine wont rev over 2400 rpm less when i gear

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mercedes-Benz Master
  • 76,846 Answers

The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM or ECM,ECU), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems can and do cause many drive-ability related problem such as rough idle and other symptoms.

Posted on Nov 06, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 jaguar xj8 when I drive it won't go over 3000rpm


Jaguar wont rev 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > wont rev 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... Wont go beyong 3000 Revs s type 2001, wont go beyond 3000 Revs and it' in limp ... Question about 2002 X-Type ... My jaguar xjr8 year 2000 battery went dead started car went for short drive back ...

Jaguar engine cuts 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > engine cuts 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l P0332 - Knock ... Car is boging out in park and will not go over ... driving, don't worry about it.

Rev Won't go up

www.jaguarforum.com/showthread.php?t=14662

Dec 15, 2015 | Jaguar Cars & Trucks

1 Answer

My mazda drifter 2.5 D don't rev over 3000 rpm and don't go over 120 km when its in 5th gear,its like limiting.What can it be it never did it?


When you rev the engine and does not go over 3000 rpm is this in neutral or when driving in gear? Some vehicles have a rev limiter to not allow rpm over certain point when in neutral gear but is typically not limited when driving vehicle. This sounds like a very low rev limit but not abnormal if you can get engine to rev higher when driving. You call a drifter so truck must be non US market. Is this engine a 2.5 liter diesel 4 cylinder motor. Might just be your top rev and speed if this is the case.

Nov 21, 2015 | Mazda Cars & Trucks

1 Answer

Why my honda wont let me rev it up pass 3000 rpm..


will it go over 3000 when driving. if so then when not in gear it is hitting the rev limiter, there is nothing you can do as its built into the program to keep the engine from damage when not driven.

Jul 16, 2015 | Honda Cars & Trucks

1 Answer

I HAVE A MICRA 2005 MODEL WITH NO POWER. WHEN THE CAR IS IN NEUTRAL CAR REVS FINE, THE MOMENT YOU SELECT 1ST GEAR ENGINE LABOURS AND REVS UP VERY SLOWLY AND DOESNT REV PASED 4000 RPM PLEASE ADVISE


possible selector problem when you push forward for 1st your are actually pushing into 3rd, try starting car from 2nd gear and see if it stalls as that would mean you are hitting 4th. usually a car can pull off in second gear ok. if this is the case go to a dealer to sort this out. as your gear selector is not aligning up correctly. if this is not the case the engine could be losing compression but that seems less likely.

Oct 22, 2014 | 2005 Nissan Micra Visia

1 Answer

1995 chevy regular cab 4.3l v6 2wd wont go into overdrive


Sounds like it is stuck in second gear. Overdrive only drops rpm by a couple hundred. In third gears you should still be less than 3,000 rpm.

Second gear is a default gear when the transmission is in limp mode. Is the check engine light on? Does it shift if you manual shift through the gears with the gear selector?

Sep 21, 2014 | 1995 Chevrolet C1500

1 Answer

Why wont my isuzu rodeo stay in gear


there are only 3 issues here.
1 weak engine, , even 1st gear I have no engine power.
2: 1st revs normal but wont shift up.
3: the transmission slips. (flares) RPM goes nuts.

which one?

Jul 14, 2014 | 2001 Isuzu Rodeo

1 Answer

What are the torque specs for the main caps?


Engines & Power (more) Four-Wheel Drive Trims
spacer.gif Laredo 4WD TSi 4WD Limited 4WD Orvis 4WD Standard Engine 4.0L 185 hp I6 4.0L 185 hp I6 4.0L 185 hp I6 4.0L 185 hp I6 Horsepower 185 @ 4600 RPM 185 @ 4600 RPM 185 @ 4600 RPM 185 @ 4600 RPM Torque (lb-ft) 220 @ 2400 RPM 220 @ 2400 RPM 220 @ 2400 RPM 220 @ 2400 RPM Rear-Wheel Drive Trims
spacer.gif Laredo 2WD TSi 2WD Limited 2WD Standard Engine 4.0L 185 hp I6 4.0L 185 hp I6 4.0L 185 hp I6 Horsepower 185 @ 4600 RPM 185 @ 4600 RPM 185 @ 4600 RPM Torque (lb-ft) 220 @ 2400 RPM 220 @ 2400 RPM 220 @ 2400 RPM

Nov 12, 2010 | 1997 Jeep Grand Cherokee

1 Answer

REVS TOO HIGH WHEN COLD...........


High RPM is by purpose. Reason is to get engine hot as quickly as possible to reduce emissions. There is nothing to worry about. I am sure if engine is warm/hot then you wont see high RPM even if you resart it.

Dec 15, 2008 | 2002 Toyota Corolla

1 Answer

1993 nissan


Can you not get any RPM out of it above idle, or does it rev to a certain point (say, 2400 RPM) and then refuse to go higher? If it's the latter, where the revs stop at a certain low point, check the mass airflow sensor out - on my 300ZX, a bad mass airflow sensor triggered the computer to limit RPM to 2400 to keep from damaging anything in the engine.

Oct 20, 2008 | 1993 Nissan Pathfinder

2 Answers

Loss of power at 2400 rpm's


Check your mass airflow meter. If it's bad, at least on my 1990 300ZX, the car won't rev over 2400RPM (it's a safeguard built into the ECU of the car). Grab one from a scrapyard and swap it in and see if that fixes the issue.

Aug 23, 2008 | 1984 Nissan 300ZX

Not finding what you are looking for?
2003 Mercedes-Benz E-Class Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...