Question about Cars & Trucks
I would like to disable the theft system completly
The factory systems can't be disabled, they are woven into the electronics of the vehicle
Posted on Nov 06, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1994 cadillace anti theft system
I just had this same problem with a '96 . do you have a vats key in your '94? you need to bypass the VATS system. read some of the blogs on this site and it will tell you how to do it. I fixed mine with a $2 resistor from radio shack.
Posted on Oct 12, 2008
With the doors shut, insert the key into the drivers door lock. Lock and unlock the door 5 times. This should reset the system. If that doesn't work you should contact a qualified repair shop.
Posted on Mar 20, 2009
According to the people at jeep it can not be disabled. WRONG!!!! here are the steps that work.
First you must pull the plastic off the front of the dash on the passenger side.
Behind the glove box you will find a metal box shaped compartment.
Inside that box is your alarm. DO NOT DISCONNECT IT YET!!!!!!!!!!
The most important thing is the jeep must be running before you disconnect the alarm.
Start the jeep and look at the little box and you will find one screw that is holding the alarm box in place. remove the screw and disconnect the wires going to it.
At this point you can turn off the jeep.
The reason you must have the jeep running is the computer shows it has an alarm in place and if you disconnect it while the jeep is not running it will shut down the jeep thinking it has been stolen.
With the jeep running and you disconnect the alarm it will not be able to send the code to the computer showing an alarm is in place and the jeep alarm will not cause you any problems ever again..
If you have questions about this just let me know at email@example.com
Posted on Jul 12, 2009
Try Turn your vehicle on, while its on unhook the alarm box from behind the dash. if you attempt to do this without the vehicle on it will not work. an other solution would be to ground the purple and yellow wire on the drivers side door
Posted on Sep 05, 2009
Try re-setting the computer...Disconnect the negative terminal of the battery and leave off for 5-10 minutes. This will allow the computer to reset. The charger may have interupted the signal or something.
Posted on Mar 11, 2010
Tips for a great answer:
Jan 26, 2017 | 2002 Oldsmobile Alero
Feb 26, 2016 | Cars & Trucks
Oct 26, 2015 | Cars & Trucks
Jun 17, 2015 | 2006 Cadillac CTS
Dec 16, 2014 | 2002 Lincoln Navigator
Oct 28, 2013 | Toyota Cars & Trucks
May 17, 2017 | Cars & Trucks
May 09, 2017 | 2000 Pontiac Bonneville
Mar 07, 2010 | 1994 Buick LeSabre
70 people viewed this question
Usually answered in minutes!