Question about Cars & Trucks

1 Answer

My crysler town and country starts and off again because the security light did not go off

The security light does this intermittently, at times it comes up while you are driving, under such condition if you off your ignition it will not start when you try to restart untill you leave the car for like 12 hours or more for it to reset itself

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 75,797 Answers

Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS, TPMS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System

Posted on Nov 06, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Hightower971
  • 183 Answers

SOURCE: 2005 Chrysler town & country touring won't turn over.

Sounds like you need a starter, or you have a loose wire somewhere under the hood.

Posted on Apr 25, 2009

junit80
  • 81 Answers

SOURCE: I have an ABS warning on 1994 Lincoln Town Car

ABS SENSOR GOING OUT

Posted on Jun 24, 2009

  • 36 Answers

SOURCE: wont start security light stays on

Body Control Module (BCM) on both counts. Find a shop in your town that specializes in electrical systems to test it. Beware, these can be intermittent problems, so make sure they keep it until the car does what you have observed. Expect to spend about $450 for the replacment. Dealers quoted me between $700 and $1,100 for the same repair. By the way, a new BCM will probably only last you about 12 months.

Posted on Aug 14, 2009

  • 355 Answers

SOURCE: Possible security light problem on 1999 pontiac firebird...

if you have the chip in the key, then this will surely help you: http://newrockies.com/vatsbypass . It was the only thing that saved my car.

Posted on Mar 08, 2010

  • 373 Answers

SOURCE: 1991 Dodge Dynasty LE

Sounds like you are having a fuel problem with the fuel filter. If you have not had your car serviced in quite awhile i would do so. At least change the fuel filter and check the air filter as well. Hope thias will help you.

Posted on May 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where's the starter on the engine 1998 crysler town and country


It is located in the conventional place for the starter on most engines. It mounts to the transmission bell housing/engine mating area. Yours is on the lower front of the engine (just behind the radiator).

Dec 23, 2011 | Cars & Trucks

1 Answer

The engine light came on and when i reset the code p 0700 came up what does it mean I have a crysler 2004 town and country


It means you have a code in the TCM. You need to have the Transmission control module scanned for codes.

Jun 08, 2010 | 2004 Chrysler Town & Country

2 Answers

Check engine light comes on. odb2 code P2096 What does it mean


WHAT EXACTLY MEANS THE CODE P2096 AND HOW I SHOULD FIX IT CRYSLER 300 2010

Apr 24, 2010 | 2005 Chrysler Town & Country

1 Answer

Vehicle wont Start


you have lost power/check fuseable links,main fuses/and of corse battrey cabels at the battrey

Nov 20, 2009 | 1998 Chrysler Town & Country

1 Answer

The alarm in my car came itself all the time crysler town and country limited crysler 2002


sensor problem ?? where or what has gone wrong ? with a fault like this take it to the dealers

Apr 05, 2009 | 2009 Chrysler Town and Country

1 Answer

Coolant fans will not stop running on a 2001 crysler town and cou


You may need to replace the Temperature Control Sensor. Located at the engine near the thermostat housing.

Mar 03, 2009 | 2001 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...